Ningbo professional mounting technology?

1. Prepare the outer frame strips and accessories to be installed.

2. Where is the mounting of traditional calligraphy and painting in Ningbo?

I have seen it in the drum tower before.

3. Where can I mount pictures in Ningbo?

There are many shops in Gulou Pedestrian Street.

You go in through the gate of the Drum Tower, cross a crossroads, and then walk into the alley on your left.

I think there are five or six.

Machine installation, full manual installation and semi-manual installation are all acceptable.

4. Hand painting is divided into several steps.

Hand painting is divided into the following steps.

First, buy tools such as combination brush and brown brush: combination brush and brown brush are the two most important tools for manual painting and calligraphy mounting.

It is better to choose 24-tube combination pen. The newly bought combination brush drops some 502 glue on the root to prevent hair loss. It is best to soak the newly bought brown brush in alkaline water for a period of time to remove the palm skin and impurities on its surface.

5. Ningbo calligraphy and painting mounting, which is the most professional and best?

Many, under your network, some of my clients do the same. Shenghan network

6. Specific steps of painting and calligraphy mounting

The specific steps of calligraphy and painting mounting are as follows:

1. Spread the painting heart upside down on a clean painting case, and spray fine mist on the back of the painting heart to make it moist and white.

7. What is the process of traditional Chinese painting by hand?

It is suggested that self-study is no longer needed. The painting and calligraphy mounting industry requires extremely high experience, and there is basically no success rate in groping for it. Learning manual painting was brought out by the master with his disciples. Reading and doing experiments can only ruin a batch of paintings and achieve nothing. For a simple example, it is difficult to master the temperature and heat of cooking, and it is not clear in a few words. You must teach by yourself. Moreover, how to filter and store jiaozi at any temperature requires experience. This is just a preparatory work. When it comes to painting mounting, there are countless details. If you can't find an experienced master to take you around, I suggest spending money to find someone to install it. Installation requires high technology. If the manual mounting technology is not home, it is easy to have problems such as edge rolling, shelling and cracking, and the purpose of beautification and reinforcement cannot be achieved.

8. Where can I mount paintings and calligraphy in Ningbo?

Traditional hand-painting at No.44, Lane 72, Gulou Hutong Street, Haishu District, Moyuanzhai has been going on for more than ten years. In Ningbo, painting has a good reputation. Many large exhibitions in Ningbo were planned by his family.

9. How to operate hand painting?

The process of Chinese painting by hand;

1, underpinning; Spread the picture on a block of wood and brush it with water.

2. Repair: Repair the damaged part of the painting, brush the damaged part with water and repaint it.

3. Large support: large-scale scrubbing with water and large-scale repair.

4. Dry: Put the picture and the board together and dry them.

Equipment and tools for mounting calligraphy and painting;

(1) Studio (also called mounting room): Requirements: worry-free, bright, clean and tidy, safe and convenient, with moderate temperature and humidity.

(2) Wall-making (also called big wall and board-making): used for leveling and drying painting cores, mounting pieces and various mounting materials. Requirements: Flat, smooth, ventilated and dry.

(3) Desk (also called installation desk): Requirements: the desk board is hard, the desktop is smooth and flat, and the height of the desk is generally about 80 cm.

(4) Air drying rack (also called air drying pole): used to dry processed backing paper, colored paper and various materials.

(5) Copying table: glass desktop with built-in fluorescent lamp, which is used to uncover and mount old paintings.

(6) Ladder: used to step on the wall during installation.

(7) Combination brush: used for mounting silk, silk, paper, painting heart and painting.

(8) Brown brush: used for mounting silk, silk, paper, painting hearts, painting mounted pieces on the wall, etc.

(9) Paper cutter: used for drawing Fang Zhengzhi Heart, cutting and matching painting materials, etc.

(10) Ruler and chopping board: used to draw a square heart and cut and match painting materials.

(1 1) Cone needle and tweezers: used for drawing hearts and picking out sundries.

(12) Bottle opener: used to uncover the mounting pieces and various materials on the wall.

(13) Oil paper (also known as pulp paper and paste insulation): used for shaping leftover materials and paste insulation.

(14) Stone (also known as grindstone): used to grind and smooth the back of the installation.

(15) Wax board: It is used to rub and coat the back of the mounting when the mounting is calendered.

Other tools: scissors, duster, fork, watering can, basket screen, wood saw, electric drill, pliers, copper wire, washbasin, towel, brush, pigment, ink, palette, plastic film, etc.

10. What is the professional mounting process of cross stitch?

First, run the embroidered cross stitch in detergent water, and then dry it for later use.

This is the back of the frame.