What are the main points of cleaning the external wall?

What are the main points of cleaning the external wall? This is a problem that deserves our attention. There will be some dirt on the exterior wall of the house after weathering for a long time. Cleaning up in time can handle the problem well. In order to ensure our better cleaning, it is necessary to know what are the cleaning points of the external wall? We will introduce it to you in the following article. This will be of great help when we clean.

First, what are the main points of cleaning the external wall?

1, cleaning, choose a place to fix the rope on the roof platform, understand how many times the rope needs to be wound, and do several load tests to drag and clean the external wall, so be sure to be foolproof. Put rubber pads (angular) where necessary to prevent the rope from breaking due to friction. Tie the hanging rope to the U-shaped buckle of the sitting hanging board, hang a bucket on the side of the board, and clean the external wall with half a bucket of detergent, which is easy to spill waste. Make sure to bring all cleaning tools. It's inconvenient to take it again. The rope has a special fastening method, which can keep the hanging board from slipping in the air. The cleaning personnel can freely operate the control rope, which is completely controlled by the cleaning personnel themselves.

2. From the operational point of view, there must be someone watching the top and bottom of the building, and we need to know about it as a security guard. You should master the knowledge of safe electricity use and the skills of cleaning equipment very skillfully. If you work with water, pay attention to the surrounding insulators to avoid the danger of short circuit. Before using the cleaning equipment, the staff should check whether there is any leakage in the equipment of the cleaning machinery, and it is forbidden to work with illness.

3, cleaning, when using cleaning chemicals to understand the role of cleaning agents, need to know, to prevent accidents, when cleaning the external wall at high altitude, you should correctly use the tools in your hand to prevent the tools from falling. It's best to put up warning signs such as "aerial work" and "careful sliding" downstairs in advance to prevent pedestrians from being injured. Workers are forbidden to smoke at the professional exterior wall cleaning site. Pay attention to the surrounding conditions. If there is a fire hazard, call 1 19 in time.

Second, what are the cleaning methods of the external wall?

1, cleaning methods are as follows: hanging rope and hanging plate are used to lift people to the working position for cleaning. It's also very simple. This type of stereo is relatively simple and low cost. As long as the workers have good physical quality and the ropes are firmly connected, ordinary buildings can be cleaned in this way. But this way of operation must make safety measures in place, otherwise it is very dangerous and the safety measures are not in place, causing accidents.

2. Cleaning method: use platform equipment such as spider car and lift car, pay attention to safety, and transport workers to designated places for construction. This construction method has great limitations and is generally suitable for difficult projects below 36 meters. Because of the high cost, it is rarely used.

3. We need to know the double-sided wiping method: It is very important to clean some glass windows with a double-sided magnetic glass scraper. This method can be operated indoors, but it has low efficiency and poor reliability and is widely used in the south. Because of the magnetic force, it has little effect on the hollow double-layer glass.

The above article was introduced to you by Bian Xiao. What are the main points of cleaning the external wall, so that it will be convenient for us to clean it.