Installation method and advantages of invisible protective net

In modern society, many families attach great importance to the use of security measures, especially in balconies, windows and other places. It has become a trend to install anti-theft nets, especially for low-rise residents, who usually choose to install anti-theft nets. However, the traditional anti-theft net usually rusts after many years of use. The rusted water will affect the building surface, easily fall and hurt passers-by, and hinder escape in case of fire. Therefore, for the sake of safety and beauty, the current urban construction management unit requires that new buildings are not allowed to install traditional anti-theft nets, and the anti-theft nets of buildings on both sides of existing main roads are forcibly removed. Then installing an invisible protective net is an inevitable trend. So how to install the invisible protective net? What are the benefits of the invisible protective net?

How to install the invisible protective net?

First, measure the size.

1, the horizontal skeleton measures the size of the window.

Because it is necessary to install a horizontal skeleton on the outer wall outside the window, the size is larger than the ruler at the window opening.

2. If it is a vertical skeleton, it needs to be installed on the windowsill outside the window, just like the size of the windowsill.

Second, skeleton cutting.

Because the skeleton is an upper skeleton and a lower skeleton, when cutting the skeleton, the two skeletons should be opposite and the holes should be aligned, otherwise the steel wire will not be vertical when it is tightened.

Third, fix the skeleton on the wall.

First, punch holes in the skeleton groove. There is a self-contained line in the groove, and a hole is made every 10 cm on the line.

Then punch holes in the skeleton slot and also punch holes in the wall, and the upper and lower skeletons should be aligned.

Four, hanging steel wire

Take one end of the steel wire and insert the steel wire in the direction of the arrow of the single lock device, which can be pulled out to 1 m to 2 m to connect the room with the detector. The unidirectional locking device is used to fix the first and last steel wire. A single locking steel wire can only be tightened, and cannot be pulled backwards. The first wire is in the upper right corner, and the last wire may be in the upper left corner or the lower left corner.

Five, skeleton self-locking

The skeleton cover is locked on the skeleton groove through skeleton self-locking. The skeleton cover can not be opened until the steel wire is cut off and the tension of the skeleton groove returns to the factory state. The implementation and application of this device will make the installed protective net look more beautiful (without rivets) and the anti-theft coefficient safer (the anti-destruction performance of the skeleton is greatly improved). But for the builders, it means a lot.

Sixth, connect the short line detector.

After the steel wires at both ends meet together, you can cut the steel wire at the end, make a hole in the window frame, and put the steel wire into the room for connecting the broken wire detector.

Advantages of invisible protective net:

1, to prevent the balcony clothes flowerpot from falling.

2. Ensure the safety of children and prevent climbing.

3. Relieve the discomfort at high altitude.

4, make full use of the balcony effective space

5, does not affect the line of sight and urban landscape.

6, can be connected with the intelligent anti-theft system.

7. Meet the requirements of fire control and hygiene.

8. Fire can be quickly removed in a few seconds.

9, 15 meters away completely invisible.

10 is like putting invisible protective clothing on the balcony.

Invisible protective net solves several shortcomings of traditional security window.

1. meets the needs of community protection and theft prevention under the new situation, and the property is recommended.

2. It is basically invisible beyond15m, and the overall style and landscape of the building are not affected by the tension of 1 10kg steel wire.

3. In case of fire and emergency, the intelligent invisible anti-theft net can be quickly dismantled within 3-5 seconds, which is convenient for escape.

4. Ultra-fine steel wire and concealed structure make firmness and beauty coexist.

5. Effectively put an end to theft and prevent people from accidentally falling off the building.

6. It can be connected with a high intelligent alarm host, and the anti-theft coefficient is higher.

7. Not easy to climb, beautiful as new after long-term use.

Invisible protective net is not only safer and more beautiful, but also has become an inevitable choice for many families, especially in some specialized high-end residential areas. For the integrity, unity and beauty of the community, owners are often required not to use security window in property management. If it is necessary to install it, it is best to use the invisible protective net, so now the invisible protective net has basically become an inevitable choice for most communities. When installing, you should first understand the installation steps and follow the instructions. I hope the above steps and methods of installing invisible protective net can help you. If you still don't understand, you can refer to the online installation video to learn more intuitively.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~