How to clean and disinfect the secondary water supply pool?

Chlorine dioxide disinfectant is generally used in water tanks and pools for secondary water supply.

1. Wash the inner wall of the water tank with clean water;

2. After washing, open the drain valve or start the submersible pump to discharge the cleaning water;

3. Rinse the clear water in the back row with clear water again;

4. Close the drain valve or submersible pump. Flushing procedure: first, the top of the box, then the four walls, and finally the bottom of the box, from top to bottom, from inside to outside.

disinfect

1. Mix chlorine dioxide disinfection powder (powder kg: water m? ) The dilution ratio is mother liquor of chlorine dioxide, and the concentration of disinfectant is 50-65438 000 mg/L. Please refer to the working requirements for the usage method.

2. After disinfection, clean the inner wall of the water tank with clean water, and drain the remaining water;

3. Close the drain valve or submersible pump;