Illustration of how to embroider cross stitch.

1. Thread the thread through the lower left hole of the lattice to be embroidered;

2. Insert the needle into the inclined hole and at the same time insert the needle out of the hole on the left side in the horizontal direction;

3. In the same way as in 2, simultaneously insert the needle into the oblique hole and out of the horizontal hole;

4. Repeat the process of 1 and 2, and embroider into a cross shape from top to bottom. In the state of 3, put it into the hole in the lower right corner of the diagonal direction, and then go out from the hole on the left side of the horizontal direction;

5. Thread the line into the hole in the lower right corner diagonally again, and then through the hole in the left direction;

6. If you go back to the starting point, you can complete all the cross figures;

7. The lines on the back will be arranged parallel to each other. Don't tie a knot. Just thread the thread through three or four parallel lines.

8. Cut off the extra thread and tie a knot like this. No matter how you wash it, the thread will not come loose!