Treatment method of soaking water in Andy floor of Xifei suspended ceiling

1. Find and cut off the water in time. If the floor is deformed, it is necessary to find the position of the water outlet from the deformed position and cut off the water supply in time.

2. Clean the water on the floor, aiming at the solid wood floor installed at home, in a straight line way, with a small water accumulation area.

If you find that the solid wood floor is flooded in a very short time, you can use a high-power vacuum cleaner to suck out the water vapor.

But if the floor is flooded in a large area, all the floors should be pried up and dried in the shade.

3. Due to various reasons, the floor is soaked in water in a large area, and the amount of water is large. Inform the property and related manufacturers in time. Consumers should inform the floor manufacturer's customer service while cleaning up the site and remove the floor as soon as possible.

4. Take photos of the scene as evidence. Before workers come to the door, they need to check the inventory and batch of the floor to be replaced, because only the floor with the same color and specification as the original floor can be used, otherwise it cannot be repaired.

And take photos of the scene in advance so that they can be treated as evidence in the event of disputes in the future.