A Summary of Five Articles on Librarians' Personal Work

The written materials that summarize and analyze the study, work and life of a period, a year and a stage can make us think, so we should review well and write a summary. How should I write a summary? The following is a summary of the personal work of librarians that I have compiled for you, hoping to help you!

Documentary personal work summary 1

In 20__ _ _, as an engineering documenter, my main job was to follow Pan Moumou to carry out quality inspection and project acceptance supervision at various construction sites, and at the same time, I was responsible for the data collection, distribution, sorting and archiving of two construction sites in Area A and Area B.

The quality of a project is usually measured by the reflection of the engineering entity, but the engineering data is also an extremely important link. Through specific and detailed information, we can reflect the advantages and disadvantages of materials used in the project, the handover situation between processes, the construction situation of the project and so on. Therefore, supervision librarians play an important role in supervision work. As the supervisor of the company, we should be strict with ourselves, take good care of the pass, do a good job in collecting, reviewing and sorting out information, and make due contributions to the development of the company.

According to many years' experience in librarian work, I think and summarize the work of librarians as follows:

First, strengthen information management.

Doing well in data management is a necessary condition for doing well in data management. Because the project construction supervision data is composed of records recorded by the project supervision organization in the process of supervising the project, it is a comprehensive and true reflection of the project construction process and plays an important role in controlling the quality of the project construction. Therefore, if the data can't meet the work requirements, the quality of the engineering entity is virtual.

Therefore, we should attach importance to the management of data ideologically, adhere to the principle of data first, and strive to achieve "data pre-control project quality"

Second, master the scope and data of engineering data collection in each stage.

Third, strengthen the effective connection between information and websites.

Four, strengthen communication and contact with the owner and the construction unit, with the necessary coordination potential.

Fifth, we should strengthen our study.

Summary of librarian's personal work II

With the passage of time, I have been working in _ _ _ _ _ _ _ company as an information officer in the contract department for more than _ months. At this moment, I will review the past, sum up my experience, find out my shortcomings, enrich myself and make my work better. I will make the following concrete summary of my past work:

During my tenure in the company, I worked as an information officer in the contract department. My main work is roughly divided into document arrangement, document examination and approval procedures, cooperation with various departments of the company and settlement of some materials. The details are as follows:

I. Documentation arrangements

1. Contract: This is one of the most important tasks of the Contract Department. When I first arrived at the company, I had relevant contract ledgers and contract files, but they were not systematic and clear enough to be clear at a glance. So, with the help and guidance of the department manager and colleagues, I numbered all the contracts in the contract department systematically and comprehensively, and filed them by year.

Electronic account books have also increased accordingly. In addition to all the basic information of the contract itself, a part of ledger is added to describe the whole contract and project in more detail. The contract answering questions filed by the Contract Department are divided into _ _ _ _ _ _ _ _ _ _. _ _ _ From _ _ to _ _ _ _ _ _, there were _ _ contracts; _ _ _ There are _ _ contracts for this project; _ _ _ existing _ _ contracts; The contract part of the general contracting department * * * files _ _ copies of the contract. Although the whole work data is not very heavy, it takes a lot of time, and because of this, I have a preliminary understanding and understanding of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. On-site visa form: On-site visa is a process that is approved on the spot by the person in charge of the construction site when problems are encountered in the construction process, because it takes time for approval. Refers to the certificate signed by the contractor's on-site representative (or his client) and the contractor on the duty events involved in the construction process. It belongs to sporadic labor consumption, sporadic mechanical consumption, rework caused by design change or engineering negotiation, and the confirmation of sporadic new quantities outside the contract proposed by the contractor according to the contract.

Party B shall report it to Party A's project department, and the documenter of the project department shall give it to the documenter of the contract department. After receiving the on-site visa form, it must be reported to the contract manager, who will uniformly assign it to the corresponding pre-settlement personnel for corresponding audit, and then feed it back to the contract department librarians, and then the contract department librarians will feed it back to the project department and supervision, and the contract department will keep a copy. At first, the on-site visa did not have a complete ledger and a clear classification of documents. In order to facilitate the smooth progress of future work, with the help of managers and colleagues, on-site visas are classified into documents and entered into electronic account books. At first, for the convenience of engineering statistics, on-site visas were classified according to construction sites. Later, because most construction units have to settle accounts, the original documents and ledgers classified by construction sites were changed to construction units, and the amount reported by construction units was preliminarily counted. Up to now, the contract department has _ _ _ units and individuals with on-site visas for _ _ _ projects; _ _ _ Project site visa _ _, * * * _.

3. Settlement data: Settlement data are generally divided into two categories.

First, the construction settlement data-produced by the construction unit in accordance with the prescribed format and data and reported to the engineering department, and then handed over to the contract department by the engineering department;

II. Material supply settlement data-The supplier of Party B shall directly make it according to the specified format and data and submit it to the Contract Department. Finally, the Contract Department shall arrange and bind it, and the department manager shall issue it to the corresponding presetting staff. After the audit is completed, the final settlement form will be distributed to relevant departments and entered into the electronic ledger.

Settlement data I * * * is divided into three parts: general contractor, sporadic project and material supplier, in which the list of settlement completion data of general contractor and subcontractor includes: power of attorney of budget and final account personnel; Summary of project settlement; Settlement book reported by the construction unit; Draft calculation of engineering quantity; On-site visa form (original); Design change order (original); Meeting memorandum (interview record); Price confirmation sheet; A material clearing data; Project completion acceptance form; Time limit for a project confirmation sheet; Formal completion drawing; Contract text; Other settlement related materials; Deduction slip and other information. The list of completion data of sporadic project settlement includes: settlement book; Orders for sporadic projects; List of completion and acceptance of sporadic projects; Summary of sporadic project settlement; Performance evaluation form after sporadic procurement; Other settlement related information.

The data list of material supplier settlement completion includes: settlement book; Settlement application; Contract text; Receipt summary table; Four-way acceptance sheet; Meeting memorandum (interview record); Price confirmation sheet; Post-performance evaluation form, with performance improvement feedback and other related information if there are performance improvement requirements. The main job of the contract department librarians in the final settlement is to check the completeness of the settlement data reported by Party B's unit/engineering department according to the above-mentioned corresponding list data, and check whether there is the signature or official seal of the relevant person in charge. After the information is complete, the pre-liquidator completes the examination and approval, and enters the examination and approval process.

4. Documents issued by the General Engineer's Office: The documents issued by the General Engineer's Office mainly include the technical verification sheet and the design change sheet. The technical verification sheet is one of the documents to complete the construction contract obligations and take reasonable construction measures, put forward specific plans, methods, technologies and measures, and be recognized by the employer and relevant units. Design change means that the design unit adjusts according to the requirements of the construction unit, or modifies, perfects and optimizes the original design data. Design changes shall be issued in the form of drawings or design change notices. The above two documents shall be sorted and distributed by the Chief Engineer's Office, and shall be summarized, numbered and filed after being signed by the Contract Department. Both the technical verification sheet and the technical change sheet will be attached with drawings, and this attachment will also be attached to the corresponding contract.

5. Other documents: Other documents mainly include the quotation submitted by Party B, project contact list, application form for purchasing materials and equipment provided by Party A, receiving and dispatching list and deduction list. The above documents are all received documents. After signing, they are filed by classification number and entered into the corresponding electronic ledger.

Second, the document approval procedures

The process approval of a document mainly means that the establishment or approval of this document needs the knowledge and approval of relevant leaders. At present, the documents I handle that need the approval of leaders mainly include: tender evaluation and contract approval form, payment approval form and project settlement form. The process of finding leaders to sign is also gradually familiar to all departments. This part of the work made me understand the company's management system and the specific division of labor for each department more quickly, which also brought conditions for my smooth work in the future.

Third, cooperate with the work of various departments of the company.

Cooperate with all departments of the company. This is a large part of my work data. Because the company is a whole, not a single department or leader, it needs the cooperation and cooperation of all departments of the company. This is also where I need to strengthen my study. In the course of my work, I must always cooperate and communicate with the general office, engineering department, finance department and property department. The General Engineer's Office and the Engineering Department communicate and cooperate with each other in terms of data handover, general situation of the project and progress of the project mainly by issuing documents and work contact sheets.

The cooperation with finance is mainly to confirm and unify the contract payment, because the subcontracting department and the finance department will have reconciliation work three or four times a month, mainly to ensure the accuracy of the project payment. The main purpose of financial reconciliation is to receive the copy of the payment slip fed back to me by the cashier first. I will enter the electronic bill according to the actual financial payment under the copy of the payment slip, and then reconcile the electronic bill with the accountant after confirmation, mainly about the last payment and the corresponding total contract payment and unpaid status. The cooperation with the property is mainly in borrowing, searching and sorting out the corresponding contracts, and the general information is about the project quality and warranty responsibility.

Fourth, partial supply settlement

I am mainly responsible for the supply and settlement of exterior wall tiles, kitchen supplies, hotel supplies and exterior wall insulation supplies and the settlement of fixed lump sum contract. I learned a lot of practical methods and skills in the settlement process, which will be of great help to my future work. At first, I didn't know where to start. Later, with the help of everyone, I gradually understood the general process. First of all, I must check the integrity of the information, mainly the confirmation of the receipt and acceptance certificate. I must have the signatures of relevant departments and personnel, I must confirm and check each document and signature, and then I make statistics on the supply list and reach an agreement with suppliers.

The audited results and data are submitted to the department manager together, and then the department manager sends cross-auditors for cross-auditing to ensure the accuracy of the audit results. After cross-examination, the contract department will issue a confirmation form for project settlement, mainly for the confirmation of the contract price and the audited amount, which will be signed and sealed by both parties after confirmation. But in these months of work, I also found many shortcomings and problems:

1, sometimes I can't remember the archived documents and distributed documents, and I can't give feedback to leaders and colleagues in time.

2. The dynamic data numbers reported by the construction unit and supervision unit are messy, and there will be duplication and vacancy, which will bring some inconvenience to the collation of verification data.

3. The settlement work is not very skilled. Although there are no big mistakes in quantity and payment, the process is not clear enough.

In view of the above problems, we will take the following measures to overcome them in the future work:

1, circulate and deliver all kinds of documents, and archive the original documents. According to the regulations of the project department, the documents are circulated, transmitted and distributed by relevant departments, signed and confirmed by the receiving department, and the original documents are sorted, classified and filed.

2. Verify the integrity of the engineering data, fill, cut and fold the wrinkled, damaged and uneven documents, and try to keep them clean and tidy. According to the data regulations, the documents are classified according to the data characteristics, and the data belonging to the same volume are bound in a file box and stored in a cabinet. And regularly check the documents, trace the lost documents and find out the reasons. Engineering data should be carefully filled in, neatly written, neatly bound and clear at a glance for future inspection and filing.

3. Seriously learn from colleagues in the project department with an open mind. If you don't understand, ask for advice in time, learn from old employees and constantly improve your industry level. For the task of receiving cloth, we must complete it to the letter and not slack off at all.

In this reconciliation, many problems and low-level errors that need to be rectified are exposed in the data. This shows me the direction of improvement, and at the same time, I need to study the regulations and related documents more seriously, master professional knowledge, improve my work potential, strengthen my sense of responsibility, and do my job well in time. Find out the shortcomings in the work so as to overcome them in the future work.

Summing up my work this year, although I made mistakes, I have really grown a lot in my own field. At first, I was a little at a loss when I changed from a fresh graduate to a company employee, but the help and encouragement of my colleagues and leaders in my work project really played a great role in me, and I also learned a lot of practical knowledge that I couldn't learn in school. In my future work, I need to learn more rules and regulations and related documents, master professional knowledge, improve my work potential, strengthen my sense of responsibility, do a good job summary and reflection in time, constantly motivate myself, enrich my energy, and improve my quality and business level to adapt to the times and the development of enterprises.

Summary of librarian's personal work 3

Unconsciously, I stayed in the engineering department for more than a year and experienced many ups and downs during my work in the engineering department. What impressed me the most was the three-in-one prosperity project that just came to the company to experience in the construction team. Fortunately, I have experienced the construction of the whole distribution project. I came to the technical department in February and realized the rigor of my work and the requirements for my work attitude, which set an example for future bidding work. During the period, I met many skilled masters and obtained. In this more than a year, through our unremitting efforts, our work has made some achievements, but there are also many shortcomings. Looking back on the past year, the work is summarized as follows:

I. Summary of work

From the company to now, I have participated in Sanhe Sheng Xing, Rainbow Home, Xiaobailou, Security Bureau, Sanlu Factory, Shunchang Real Estate and IKEA Shopping Center. The main problems existing in the work are:

(1) Because I am not very familiar with the technical process, there are many cases of rework due to the proficiency of the technical department in the process of writing the tender application group. However, through more than one year's understanding and study, I have a deeper understanding of the relevant processes and requirements.

(2) During the field trip, the problems found cannot be solved immediately due to unskilled technology, but the process of the trip is also a learning process. Through continuous study and summary, the problems encountered have been well solved.

(3) At the beginning of the work, I didn't know enough about the work, lacked the overall concept, didn't know enough about the power industry and didn't know enough about the job orientation. As a result, we don't know enough about the optimal process of work, lack logical ability and lack structural thinking. But I believe that in the future work, I will continue to study and think, so as to strengthen my cognitive ability to work and make the best process of work.

Second, work experience

1. In this year's work practice, I participated in many collective work and got along very well with my colleagues. In this process, I strengthened the most precious and important team consciousness. On the basis of trusting yourself and others, the team will be invincible if they have unified thoughts and actions. In this year's work, a lot of work was done together. In this project, everyone reminds each other and complements each other, which greatly improves the work efficiency. Communication is the most important thing in all work, so we must deal with information timely, effectively and clearly.

Under the leadership of Zhang, I deeply realized that every step of the work should be precise and meticulous, and strive for refinement. Under the guidance of this mentality, I have achieved satisfactory results in my usual work. Being able to act positively and confidently is the biggest progress in my mentality in the past six months.

Now I often calmly analyze myself, recognize my position and ask myself how much I have paid; Always remember that the work content should be precise and accurate, and personal gains and losses should be vague; Avoid risks in time, and be brave enough to take responsibility when problems arise.

3. In one year's work, after practical lessons, I deeply realized that every change and delay of the project will do great harm to the company, which requires me to know the business process like the back of my hand before bidding and construction. Before bidding, I should study the tender carefully to reduce the pain of rework because I am unfamiliar with the project or the leader is not satisfied with the workflow.

In this year's work, I learned a lot of technical and business knowledge, and also strengthened the awareness of quality, cost and progress of the project; Cooperate with colleagues around you more tacitly. It's all mine. Master, I have learned a lot of knowledge and skills from them, and learned the truth of being a man. I am glad to have them around when I first started on the road. I will definitely form an excellent team with them and make better achievements.

Third, work experience.

After half a year's work and study, I also found that I still have a gap from a professional power talent, which is mainly reflected in the immaturity of work skills, work habits and work thinking, and it is also the place where I will constantly hone and improve myself in my future work. To sum up carefully, I have failed to do well in the following aspects during my one-year work:

1. The work organization is not clear enough, so it is necessary to prioritize;

When the bidding time is short and there are many things, there must be a detailed and clear plan. If it needs to be completed immediately, it can be completed slowly. In particular, we should distinguish our work from helping other colleagues, and we should not delay our work by helping others. Therefore, from now on, we hope that the leaders can help us set posts and better define what must be done and what can be done better, especially in the office.

2. Not familiar with the process; In this year's work, I found that there are many situations where I don't know how to start because of process problems, including how to deal with mistakes and omissions. The project management process meeting of Mr. Xue made up for this deficiency and ensured the smooth completion of the project process in the future.

3. The work is not exquisite enough;

Usually, the distance between work and fine chemical industry lacks a process of self-reflection and updating and correction at any time. Although the work is often reviewed and summarized, it lacks regularity. For example, the file format and typesetting of tenders often make the budget not a headache. Here, I am also actively improving and striving for perfection. Please forgive me and give me more advice. There are also mistakes in other places. In the future, we should set aside special time for summary and reflection in our personal work, so as to be refined.

4. The working methods are not flexible enough;

In the process of work, we should make full use of the resources around us and ask for the support of other departments or personnel. Don't take things into your own hands. First, it affects the progress, and second, it cannot guarantee the quality. Prioritize things, grasp the main contradictions, draw a clear line, and think clearly about what your job is, what help you provide and what you want to do. How to communicate with other departments, how to communicate with employees in this department, how to communicate with customers, and how to provide quality services without doing more things outside our responsibilities are the places we need to focus on communication and learning in the future.

5. Lack of work experience, especially field experience;

This year's on-site experience has been greatly improved, and we have an understanding of the whole project from analysis to construction, but we still lack understanding of some details and specific practices, so we need to strengthen our study in future work.

6. Lack of knowledge summary of daily work;

Over the past six months, the work summary has made progress, but it is still not enough. If I think about the right and wrong, gains and losses of my work every day, every week and every month, I will grow faster. In the future work, I will also regard this as the key to improve myself.

7. Doing things is not decisive enough, sticking to details and procrastinating;

Procrastination is one of my great shortcomings. Everything has to be postponed. If I work more actively and resolutely, I will avoid many unnecessary mistakes in my work. In fact, sometimes, you don't have to be serious in your work. Comprehensively consider the progress, quality and cost, grasp the main contradictions, solve the main problems and make corrections at any time. Everything is done carefully, and people tend to stick to details. Learning to be imperfect is also the progress of work and the requirement of fine chemical industry.

In the future work, I will always pay attention to correcting my shortcomings, and I will certainly develop good work habits and grow into an excellent professional in the company.

Four. working face

Next year, the company will carry out more and bigger power projects, and the work pressure will be even greater. Should be able to bear hardships and stand hard work, diligent, do every job well, handle every detail, strive to improve their professional skills and execution, and grow and progress as soon as possible.

Among them, the following points are the focus of my improvement next year:

1, improve the initiative of work, do things simply and decisively, and don't be slow; 2, work should pay attention to practical results, pay attention to results, all work around the completion of the goal; 3. Improve the overall situation and take whether other people's work can be smoother as a yardstick for measuring work; 4, seize every opportunity to improve professional ability, strengthen the usual knowledge summary work; 5. Thinking and practice of fine chemical industry.

6. To understand the spirit conveyed by General Manager Xue, we should learn to learn actively.

In fact, as an old employee, all localities need to learn more, listen more, watch more, think more, do more, communicate more, learn from each employee their excellent work habits and rich professional skills, and cooperate with the continuous progress of actual work. No matter what the environment, I believe in these two points: one is that three people must have a teacher, and the other is that diligence can make up for it.

During more than a year's work, I sometimes deeply realize that it is impossible to be perfect if I put all my energy into technical work. After all, technical work is too complicated, with many projects and few people, but if I pay more, my work will be optimized. This requires me to seriously calm down and do things. This is the entrepreneurial spirit advocated by the company: to do things professionally and treat people with integrity.

In the new year, I hope the leaders will give me more opportunities to learn and improve. In the era of soaring prices, even the subway I take to and from work every day will increase in price. I hope the company can raise my salary according to my evaluation.

Summary of librarian's personal work 4

Since _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Cooperate with Party A and all units as much as possible, and assist the project manager and engineering-related personnel during the construction period, provide them with necessary information and do similar work.

Information work seems easy, but in fact it is trivial and cumbersome. It is not easy to do it well. I have been engaged in intense work since _ _ _, because I am faced with iso900 1 quality inspection. However, no matter from the acceptance report or the site construction data, there are many discrepancies and gaps in the existing data.

Collect and save the documents issued by the company and relevant departments, and put the documents that are not specifically sorted into folders according to categories to provide convenience for consulting documents. Do a good job in the distribution, circulation and transmission of various documents and drawings, and archive the original documents. According to the company's quality manual, the documents are distributed, circulated and transmitted by relevant departments, and the receiving department signs the original documents for confirmation, and sorts, classifies and files the original documents.

Responsible for the custody of engineering data. Verify the integrity of engineering data, fill, cut and fold wrinkled, damaged and uneven documents, and try to keep them unified. According to the data regulations, documents are classified according to the content characteristics of the data, and the data belonging to the same project are bound in a file box and stored in a cabinet. And regularly check the documents, trace the lost documents and find out the reasons. Engineering data are required to be carefully filled in, neatly described, neatly bound and clear at a glance, so as to facilitate future inspection and filing.

In the past six months, I have learned a lot of experience and knowledge and made great progress in communicating with people. By reading more books, asking more questions and listening more, I have further improved my work skills, which is a step better than last year.

By summing up the work of this half year, during this half year, through repeated inspection and acceptance by departments at all levels, many problems and low-level errors have been exposed in the data. This pointed out the direction of improvement for me, and correspondingly urged and improved the overall level of librarians. At the same time, we need to study more seriously the norms and regulations and related documents, master professional knowledge, improve our working ability, strengthen our sense of responsibility, and do our personal work in time. Although there are the above shortcomings, we should find out the shortcomings in our work so as to overcome them in our future work.

In short, in my future work, I will constantly sum up and reflect, constantly spur myself, enrich my energy, and improve my quality and professional level to adapt to the development of the times and enterprises.

Summary of librarian's personal work 5

During the period of 1 year in the supervision department of Phoenix Hotel, under the correct guidance of the leaders and with the help of all my colleagues, I dutifully supervised and inspected the information of the construction unit and the supervision information of the supervision department, and at the same time humbly learned from my colleagues around me in the process of work. As the project documenter of Phoenix Hotel, my main work is as follows:

1, cooperate with professional supervision engineers to strictly control the engineering data of each construction unit. Because the engineering data truly reflect the achievements of engineering construction, these data constitute various forms of information records in the process of engineering construction. If the construction unit fails to submit the progress information due to busy work, I will remind it to submit it for approval in time to ensure that the construction information is synchronized with the progress.

2. Be responsible for receiving, counting, registering, distributing, filing and managing all documents of Phoenix Hotel project. The received materials are classified, registered and filed in strict accordance with the "Classification Table of Supervision Data of On-site Supervision Institutions of Sino-foreign Jiantianli (Beijing) Engineering Supervision Consulting Co., Ltd.". Do a good job of collecting and sorting out information, borrowing from colleagues and checking by leaders, and I can take it out in time. Document distribution is recorded in detail to ensure the traceability of each document. If there is any dispute about the loss of information of the construction unit, the whereabouts can be found in the sending and receiving records. Do a good job in logistics, clean the office early every day, create a good working atmosphere, fill in the barometer, distribute labor insurance supplies in place, and lack timely statistics and supplements for office supplies.

3. Prepare meeting minutes and monthly supervision report. Meeting minutes and monthly supervision report are the summary of project progress and supervision work, and also the important basis for relevant departments to check and evaluate the work of supervision department. The minutes of the supervision meeting must be true and effective, so I insist on attending the supervision regular meeting and special meeting every week, and prepare the meeting materials in time after the meeting and distribute them to all contractors.

Define the procedures for submitting materials to the construction unit for approval: submit the construction organization design and special construction plan in strict accordance with the principle of scheme first, and organize the construction after approval. During the construction process, the quality inspection lot and hidden acceptance record of each process must be submitted to the supervision department in advance, and submitted to the professional supervision engineer for on-site acceptance on the basis of complete information. The data submission and approval process shall be carried out in strict accordance with the agreement.

According to the contract, the project goal of Hefei Phoenix Hotel is double demonstration sites and amber cups, the apartment building strives for the provincial quality project "Huangshan Cup", the Phoenix Hotel project is the key project of Economic Development Zone, and the quality inspection station of Economic Development Zone is the key supervision unit of Hefei. Therefore, various safety and quality inspections of government departments are frequent, so I can bring them in time when I check the information and answer the questions raised by the inspectors. When the information of the construction unit is lost and borrowed from me, I can get it in time. After unremitting efforts, several inspections by government departments have passed smoothly. My personality is 65438+February _ _ inspection at the security checkpoint, which won unanimous praise. I will continue to work hard and make unremitting efforts.

Supervision data is a real record of supervision work in the process of engineering construction, and it is a systematic project. It involves the substantive work of engineering contractors such as supervision units, construction units, construction units and design units, and is a symbol of scientific, standardized and legal supervision work. Supervision data reflects the level of supervision work and is an important basis for measuring and evaluating supervision work. Only when all the links are well done can the supervision work be successfully completed.

There are also many shortcomings in the work process. In the new year, I will sum up myself, consult my colleagues humbly and do a good job in every data management.

Summarize five articles about personal work of librarians:

★ Five Summaries of Librarians' Personal Work

★ 2020 Documentary Personal Annual Work Summary 5 Articles

★ Personal Excellent Work Summary of Librarians (five articles)

★ Summarize the excellent model essays of librarians' personal work (5 articles)

★ 2020 Project Department Documentary Annual Work Summary 5 articles.

★ Documentary personal work summary (5 selected articles)

★ 5 short articles summarizing the excellent work of librarians.

★ 202 1 five summaries of librarians' annual work.

★ 5 Personal Work Summary of Probation Librarians.

★ Documentary personal annual work summary template (5 pieces) 202 1