The basic flow of fire fighting personnel in property companies to deal with fires.

When the personnel in the central fire control room found it, there was an obvious fire source problem. If it is handled in time, you can confirm it according to the fire signal, call 1 19 to report the fire and organize personnel to put out the fire. If the fire is too large, fire extinguishing procedures should be implemented and the whole process should be strictly recorded in fire safety.

A, fire alarm signal processing program

(1) When the security guard on duty in the fire monitoring center receives the fire alarm signal;

(2), quickly find out the alarm position, use walkie-talkie to inform the patrol security immediately to the scene to verify;

(3), immediately verify the security report, find out the alarm location;

(4) After receiving the call from the guard on duty in the fire monitoring center, the patrol guard or administrator should rush to the alarm site as soon as possible for verification, carefully observe every corner of the alarm site, and accurately and clearly report the situation to the fire monitoring center;

(five), confirmed by on-site inspection is a false alarm, immediately notify the guard on duty in the fire monitoring center to reset; If the alarm location is in the office, the owner's room and other places, when entering the inspection, you should explain it clearly to the owner and apologize before leaving.

(6) If the alarm position is in the room and locked, the security guard of the monitoring center should clearly inform the regional supervisor of this situation when reporting. If there is no key, open flame or smoke, it is necessary to break the lock and enter the site for inspection, and lock it after eliminating the danger.

(seven) confirmed by on-site inspection as a fire, according to the initial fire treatment procedures. After processing, reset the signal and make records.

Second, the security guard of the fire monitoring center is on duty after receiving the fire alarm call.

(a), immediately organize the recent post inspection, fight to his death.

(2) If the situation is serious, call "1 19" in time and report to the regional supervisor.

(3), contact each post personnel, organize fighting.

(four), closely monitor the alarm location, report at any time.

Third, organize fighting.

(a), lead the firefighters to carry fire extinguishers to the scene of the fire as soon as possible.

(2), immediately command the personnel present to put out the fire.

(three), command the fire scene and the personnel who may be affected to use the fire escape to evacuate.

(4), stick to the fire, control the fire, waiting for the arrival of the professional fire brigade.

(five), after the fire is lifted, in conjunction with the fire department, carefully investigate the scene, collect information, find out the cause of the accident.

(six), organize relevant departments to seriously sum up the lessons.

(7), record the whole process of fire (fire, fire), archive.

Fourth, put out the fire

(a), after receiving the fire, we must immediately mobilize the emergency team to the fire to put out the fire, and at the same time understand the basic information such as the location of the fire and the fire.

(2), according to the requirements of the chapter dealing with emergencies, combined with the actual situation at that time, organize fighting.

(3) Report to the regional fire chief or call the police in time.

(four), the public security fire department arrived, appoint someone to lead the way, water diversion.

(5) Organize security personnel and company employees to actively participate in fire fighting, rescue valuables, and guide owners and workers to move quickly and safely.