Is it illegal not to tell the property about the house decoration?

You must tell the property. The process is as follows:

1. Show the property sales certificate and register the owner's information to facilitate the communication between the property and the owner.

2. Go through the formalities of decoration permit, and then decorate after obtaining the property permit.

3. Pay the decoration deposit, which can be refunded. It is only a form of deposit, which will urge the owners to strictly abide by the decoration regulations, without damaging public facilities, changing the structure of the house and changing the appearance of the house.

4. The pass of the decoration personnel also needs to be handled in the property to facilitate property management.

Extended data:

1. Water and electricity acceptance: During water and electricity acceptance, we should not only check the pipeline quality, but also check whether the valve switch is flexible, do a good job in water supply and pressure test to see if there are any problems such as water leakage. When the circuit is accepted, it is necessary to check whether the switch socket is installed in place and conduct a power-on test to check whether the switch socket can be used normally.

2. Waterproof acceptance: When waterproof, the kitchen turns up 30cm, the toilet rolls up 120cm, the waterproof turns up 180cm, the door cover is aligned with the external wall, and the wall surface is flat without hollowing and cracks. The water storage depth shall not be less than 2 cm and the time shall not be less than 36 hours.

3. Acceptance of the floor: When the floor is accepted, it is necessary to check whether the shop is loose and empty. You can tap the ground gently with a small hammer. If the sound is empty, the floor is empty. In addition, check whether the pedal line is closely connected with the floor wall.

4. Panel acceptance: When accepting the panel, pay attention to whether the pavement, color and material meet the requirements, and observe whether the panel surface is flat and smooth, whether the pattern is clear, and whether there are problems such as warping and pasting. In addition, check whether the seams of the panel are tight, and the seam difference should not exceed 0.5 mm.

5. Acceptance of suspended ceiling: During the acceptance of suspended ceiling, it is necessary to check whether the material, color and specifications of suspended ceiling meet the requirements, and pay attention to whether the keel is closely attached to the panel. In addition, the ceiling can not have cracks, stains and other defects. If these problems occur, we should ask the workers to do it again in time.