Do you pay attention to the finishing work of home improvement? What do you need to do after the renovation?

Nowadays, many people don't know what problems to pay attention to or how to carry out when decorating their homes, so they are likely to ignore some important links. When decorating at home, no matter which process is more important, especially when decorating, then here are some points for attention in decorating home decoration. What do you need to do after the renovation?

Do you pay attention to the finishing work of home improvement?

1, plan

The merchants of various sanitary wares may be different, and the time and space required for installation are different, so the owners should plan ahead, what to install first, what to install later, or which products can be installed at the same time. After making the plan, communicate with the merchant to make an appointment for on-site installation.

2, product acceptance

Under normal circumstances, after consumers are optimistic about the product style, they will book from the merchant first, and the product will arrive home with the installer when installing. After the products arrive at the site, the owner should first check and accept them to ensure that the sanitary ware will not crack due to collision during transportation. After the installation is completed, the product should also be accepted to see if it can be used normally.

3. Avoid damage during installation.

After installation, supervision should be done to prevent workers from accidentally damaging the sanitary ware, or paying attention during installation, damaging the newly renovated ground and wall around.

What do you need to do after the renovation?

1, cabinet installation

After the ceiling is finished, workers can install the cabinets. If it goes well, the installation can be completed in one day. At the same time, there are sinks (excluding water fittings) and cookers. Coordinate the property before the cabinet is installed, because the cooker needs to be tested after installation.

2, wooden door installation

The production cycle of wooden doors is generally one month. Therefore, in order to make the construction period closely connected, it is necessary to let the wooden door manufacturer come to measure the size of the door opening as soon as possible after the main body is removed. Regarding the handling of doorways, it should be noted that if the doorways at home are not consistent in height, workers need to handle them at the same height to look good.

3. Floor installation

The floor can be installed the day after the wooden door is installed. The following problems should be paid attention to in floor installation: Before floor installation, let the manufacturer go to the door to investigate whether the ground needs leveling or local leveling; Moreover, the floor at home should be cleaned to ensure the dryness of the floor, so don't use water during the cleaning process.

4, switch socket installation

Generally, one hand is used to switch in the opposite direction, and the right hand is more than the left hand. Therefore, most of the switches at home are installed on the left side of the door, which is convenient to open with the right hand after entering the door, which is in line with behavioral logic.

5, lamps and lanterns installation

Lights can be white, yellow and blue (purple). After the lights were installed, the house lit up, and finally bid farewell to the dazzling light of 100 watt incandescent bulbs during decoration.

But after reading the above, have you paid attention to the finishing work of home improvement? What do you need to do after the renovation? After introduction, people should know what they should do sometimes. When decorating, people must do a good job of inspection so as to ensure better decoration. In addition, for any home improvement materials, you must go to a regular store to buy them. Good quality, as long as the use process will be more convenient, there will be no problem.