How to zero the smart meter?

How to clear the number of intelligent watt-hour meters

This requires authority and clear instructions. The handheld device controls the electric meter to reset through the communication port, so that all relevant information such as power events in the electric meter can be seen at a glance. However, there is usually a limit on the number of times. If the number of times is limited, you will return to the factory. What I said is the general situation, for reference only.

How to Clear Smart Meter and Insert Preset Card

1. Make reset card and preset card in the electric meter management system.

2. Disconnect the power supply of the electric meter until the indicator light of the electric meter goes out.

3. Turn on the power supply, and insert the reset card within 2 minutes after turning on the power supply until E=00 is displayed, and the reset is successful.

4. Insert the prefabricated card, preset the electricity fee, and the electricity meter can be started.

5. Open an account in the electricity meter management system and purchase electricity with an electric card.

How to clear smart meters

Smart meter settlement has a special settlement card. Ordinary users cannot clear it. Watch manufacturers only give large users this clearing card and a recharge system.

How to make the number of smart meters zero

Looking for a property, they have tool cards there.

How to use the reset card of smart meter? Please describe the zero clearing process. thank you

1. Make reset card and preset card in the electric meter management system. 2. Disconnect the power supply of the electric meter until the indicator light of the electric meter goes out. 3. Turn on the power supply, and insert the reset card within 2 minutes after turning on the power supply until E=00 is displayed, and the reset is successful. 4. Insert the prefabricated card, preset the electricity fee, and the electricity meter can be started. 5. Open an account in the electricity meter management system and purchase electricity with an electric card.

How to reset the smart meter

proprietary software

How to clear the watt-hour meter

Send it to the electric energy metering center of the power supply department to check the electric meter and ask for zero.

If it is not zeroed by the power supply department, it will be treated as stealing electricity.

Excuse me, does anyone know that the single-phase fee-controlled smart watt-hour meter can return to zero?

There are roughly two ways to return to zero. You need to use the computer software of the watt-hour meter, and you need to know the password of the watt-hour meter: first, you can reset the watt-hour meter directly; Second, you need to know the meter reading date of the electric energy meter. Meter reading date refers to the date after which the current electricity consumption is zero, and the electricity consumption is automatically transferred to last month. However, these two kinds of electricity can only clear the current month's electricity, and the previous electricity cannot be cleared, but it can still be found.

How to clear the carrier smart meter for your own use

Unable to clear

How to clear the meter index of single-phase cost-controlled intelligent watt-hour meter, or restore the factory setting, so that its watt-hour meter starts to measure from 0.

Smart watt-hour meter can clear the counter, but it needs professional software from the meter manufacturer.