Emergency plan for power outage property

Emergency plan for power outage property

In study, work or life, you may encounter some unexpected accidents. In order to improve the awareness of risk prevention and minimize losses, it is usually necessary to prepare a complete emergency plan in advance. How to write an emergency plan? The following is the emergency plan for power failure property that I compiled for you, hoping to help you.

Emergency plan for power failure property 1 In order to cope with the situation of water and power failure and ensure the normal work and life of the community, the treatment plan for water and power failure is formulated for the reference of relevant departments.

First, the principle of emergency treatment

The community can be divided into planned water and power cuts and sudden water and power cuts, and relevant work should be arranged reasonably to make the community work return to normal as soon as possible.

Second, the water and electricity treatment process

1. In case of planned water and power failure, the owner (residents) and each work unit shall be notified 24 hours in advance, and notices shall be issued in all buildings, bulletin boards in the lobby and electronic display screens in the community. Register the notice on the posted notice and save it.

Maintain the relevant equipment normally, and patiently explain to the owner (resident) for support and cooperation. If the water is cut off, use the domestic water tank to supply water temporarily. If the water is cut off for a long time, it is necessary to contact water supply, fire fighting and other units to solve the water supply. Power failure automatically starts, and the generator temporarily supplies power.

2. In case of sudden water and power failure, a brief notice shall be given within ten minutes, and a written notice shall be given within 1 hour, including the reasons and the expected time to resume water and power failure. And inform Zhang to put towels in a conspicuous position in the lobby of each building and save the documents. Repair and maintain related equipment, patiently explain to the owner (resident) and get support and cooperation. If the water is cut off, use the domestic water tank to supply water temporarily. If the water is cut off for a long time, it is necessary to contact water supply, fire fighting and other units to solve the water supply. Power failure automatically starts, and the generator temporarily supplies power.

Third, the management division of labor requirements of each team

(1) office

1. Print and post the notice of water and power failure in time.

2. Arrange the standby water source and start the temporary power supply device.

3. patiently explain to the owner (resident) the reasons for the water and power outage.

(2) Escort class

1, strengthen patrol security during water and power outages.

2, guide the water and electricity maintenance of vehicles, assist in maintenance services.

(3), maintenance class

1, do a good job of normal maintenance during water and power outages.

2. If water and power are cut off due to failure, it shall be repaired and eliminated in time, and the water and power shall be resumed.

Fourth, prepare emergency supplies.

1, water storage tank and domestic water tank

2, emergency lights, generators

Power outage property emergency plan 2 When the high-voltage line fails or the power supply bureau suddenly loses power, the following emergency plans are formulated for the personal safety and property safety of the community owners:

1) When the personnel on duty find that the community suddenly loses power, they should immediately notify the maintenance personnel and other relevant personnel to arrive at the scene;

2) Take corresponding measures according to the power outage range;

3) Contact all elevator cars by communication intercom or other ways of elevator configuration to determine whether there are trapped people in the elevator cars and check them one by one;

4) start the generator set;

5) Turn off the main switch of the elevator and each unit, finally turn off the main switch of the transformer load side, and turn off the high-voltage isolating switch when necessary;

6) Turn off the main switch of generator power output;

7), check whether the double switch is in the standby gear;

8) turn on each loop switch in turn;

9) Check whether all power switches and control switches are turned off before power transmission, and then power transmission step by step after confirmation, so as not to burn out electrical components;

Ten), stop, power transmission must have the necessary protective measures, at least two people work together, single operation is prohibited;

1 1) Observe the operation of elevators, pumps and other facilities;

12), the main power distribution room and the generator room each have one person on duty until the power supply returns to normal;

13), in a timely manner in the public * * * area such as each channel, unit mouth posted warm tips to inform the owner.

Emergency plan for power outage property 3 I. Emergency treatment of sudden power outage

1. After the power failure, the operators are divided into two groups. A group of transformer room, according to the second or third processing. The other group should immediately go to the power outage area and check the elevator with the order maintenance department. If the elevator is trapped, it will be handled in accordance with Article (Provisions on Rescue of Trapped Elevator). At the same time, notify the maintenance director of the engineering maintenance department and the customer service center. In case of external power failure, the maintenance supervisor or customer service center of the engineering maintenance department will immediately contact the power supply bureau by telephone to inquire about the reason of power failure and the call time.

2. External power failure: the main power supply fails, and the standby power supply (generator) is automatically put into use. When the main power supply is cut off due to external fault, the personnel on duty should check the disconnection of the high and low voltage circuit breakers, check the voltage and indicator light, exit the main power supply from the circuit breaker after the power failure and voltage loss, and hang a warning sign of "No Closing". Close the contact switch of the generator and check the running state of the generator (fuel, water temperature, etc.). ) every 15 minutes.

3, check the low voltage distribution cabinet, standby power supply is normal.

4. Monitor the incoming voltage of the mains, report to the power supply bureau, and understand the external power outage. Once the commercial power is restored, the power generation will be stopped immediately and the commercial power supply will be restored.

5. Make records and report the situation to all departments in time.

Second, the internal fault power emergency treatment

1. Turn off the load switch of the faulty cabinet (in case of fire, call the fire center immediately and put out the fire with a portable fire extinguisher).

2. If there is a 1 household circuit breaker in the low-voltage distribution cabinet, the low-voltage bus will be operated by another transformer with two loads to ensure the electricity consumption of residential facilities.

3. Report the handling process and failure to the maintenance supervisor and the foreman of the engineering maintenance department.

4. Make records and report the situation to all departments in time.

5. The engineering maintenance department held an accident analysis meeting, invited the power supply bureau, the construction party and relevant parties to participate, analyzed the cause of the accident and the treatment measures, and made a written summary report to the relevant departments.

;