How much does it cost to dredge the pipeline once? Can you clear the pipe yourself?

Sewers generally refer to sewers in our daily life, and there are many types, including toilets, sinks, floor drains, and vegetable pools. These places need to be connected by sewer pipes. The main function of sewer pipe is to pass water, which can facilitate us to discharge domestic sewage. Blocking the sewer is very troublesome, because it is easy to get dirty when the water in the sewer is not circulating, and the discharged dirty water will flow back. How much does it cost to repair the sewer blockage? Let's find out the price.

First, how much is it?

The cost of sewer dredging is generally 150 yuan -300 yuan. This price comes from the internet and is for reference only.

Second, the method

1. Take the same amount of salt and baking soda powder at home, each about 10G, and mix well. Pour the evenly stirred salt and baking soda into the sewer. At this time, some mixed powder will be on the surface of the sewer, as shown below. Ok, take a bottle of white vinegar. Pour the white vinegar on the salt and baking soda. At this time, there will be a little bubble, and this mixed liquid will flow into the depths of the sewer with white vinegar. Pay attention to more white vinegar.

When finished, let the mixed liquid stay for about fifteen minutes, and then you can boil a pot of hot water. Note that if the sewer is plastic, the temperature of hot water should not be too high. After fifteen minutes, just pour the hot water into the sewer. Don't pour it all at once, pour it slowly, so that the blockage below can be fully dissolved and filled.

After the hot water is poured, you can try it. You will find that the sewer is open. Ha, is it super simple? Let's act at once. After the sewer was opened, Dont Ask For Help was also opened.

2, look at it yourself first, but pay attention to PVC or cast iron. Buy a 2-meter pipe dredge at the stall, make several bends at the head 2 cm, put it in the outlet dredge while draining, put it in while shaking, and then put it in the inlet dredge while draining. Just repeat it several times! At the same time, it will be dredged every other week. Find an iron wire with a diameter of 0.5- 1mm and a length of 3-4m, fold it in half from the middle, then twist it into a strand, then bend both ends in different directions at one end, then put this end into the sewer pipe, grab the other end and twist it while screwing it in.

If the sewer is blocked, it can't drain normally, and it is easy to have dirt, which will easily lead to water pipe damage. In practical work, the amount of pipeline dredging is also relatively large, and the price is determined according to the degree of blockage. There are many reasons for sewer blockage, most of which are because falling into some foreign objects will cause sewer blockage. If the sewer pipe is blocked, you can use waterway dredging agent, which is a common product on the market at present and can pass through the sewer pipe.