Who is responsible for the maintenance and replacement of leaking water pipes in old communities?

If it belongs to the municipal government, it is generally borne by the water supply company, the property right belongs to the construction unit, and the leakage part belongs to the public * * * regional facilities: most of the built buildings are divided by the building red line, for example, even in the same city, the regional division standards are different:

The cost should come from the public maintenance fund, because it is a public facility, and the loss mentioned above refers to the normal loss. The responsibility for the cost caused by the water leakage of the tap water pipeline outside the building shall be borne by the relevant owner * *, who should have been repaired before the water leakage, and there was no water leakage caused by the maintenance; Most new projects cross the red line and go directly to the downstairs of the community. The division of responsibilities should be like this: the division of property rights of municipal pipe network is different in each city.

Extended data:

The tap is broken and the water won't turn off. This time is not just a waste of water. The gushing water is likely to flood the indoor items, causing greater losses. At this time, the following measures can be taken.

(1) It is the most effective way to quickly close the water main valve, and then immediately find the pipeline for maintenance and replacement.

(2) If the master valve can't be closed or the distance is too far, you can fold the towel and bind it hard, which can stop the water flow. However, after repairing the tap, you should still drain some tap water before drinking.

(3) You can also sharpen the cork of the thermos bottle with a knife, put it in the faucet to block the water flow, and then find someone to repair it. Although the water pipe burst accident is not dangerous, it may cause certain losses, and corresponding treatment measures should be taken.