Why can't the balcony be sealed?

Why can't the balcony be sealed? Now many residents like to seal the balcony, which can not only expand the use area, but also block the wind and sand, especially in foggy days. The following are the reasons why the balcony can't be sealed.

Why can't the balcony be sealed 1? First, why not seal the balcony?

1. If the owner wants to seal off the balcony at home, he needs the consent of the property, but it may be stopped. The reason why the property is not allowed to seal the balcony is also in accordance with the requirements of the local management department, because it may be the same for the whole community.

2. If the balcony is demolished at will, the safety structure of the house will be destroyed, and even the problem of expanding the balcony area without authorization will occur, which will bring security risks to the owners and other owners. In the event of serious consequences, the property management company can't take responsibility, so it will stop it. Of course, if the balcony is sealed in a reasonable way, it will not affect other owners and the general property will not interfere.

3. Close the balcony and don't use the guardrail that protrudes from the wall. In order to expand the indoor space, some owners lengthen the guardrail of the balcony, for example, 40 to 50 cm, and put flowerpots or drying things on it. This is also unacceptable. Because if it is not strong, it is likely to fall from a height. At the same time, the balcony is closed and cannot be opened from the outside. In case of an emergency at the top, it also hinders the escape route.

Second, what are the benefits of balcony sealing?

1, balcony closure also plays a certain role, such as improving the safety factor, especially for some low-rise residents, balcony closure can prevent thieves from committing crimes and play a role in security.

2, especially for families with children at home, closing the balcony is also a good choice. At the same time, closing the balcony can also make the indoor environment cleaner and reduce the spread of dust, so there won't be too much dust on the ground.

3. Some owners can also expand the indoor space by closing the balcony. For example, the balcony and living room are lengthened, and the balcony can also be transformed into a study.

Why can't the balcony seal the window 2 1 the balcony is sealed, which will cause poor ventilation in the house, make it difficult to keep the air fresh in the house, and reduce the oxygen content; On the other hand, the breathing, coughing and sweating of family members. It will cause human pollution indoors, and many harmful substances emitted by stoves, cooking, water heaters and other items will be trapped indoors because the balcony is sealed. Living in it for a long time is easy to cause nausea, dizziness, fatigue and other symptoms.

2. Ultraviolet rays in sunlight can reduce the density of indoor pathogenic bacteria, and healthy people can cheer up while enjoying the sunshine, while closing the balcony can reduce the exposure of indoor sunlight, which not only easily leads to the spread of bacteria, but also may cause stunting and rickets in infants. Therefore, it is best not to close the balcony.

However, we should also be careful not to overdo it, and not to choose a hollow balcony shape in pursuit of good ventilation and lighting effects. Nowadays, in order to expand business opportunities, many real estate developers often use hollowed-out balconies to show European customs, so as to increase the selling point of houses.

Hollow balcony is really beneficial to the ventilation and lighting of the house, but it also has some disadvantages in the pattern.

Hollow balcony violates the taboo of "void under the knee" in Feng Shui. When others look at the balcony from outside, it is easy to see people below the knee in the house, which will not only lead to no privacy in the house, but also be very unfavorable to people's mental health. Therefore, the balcony should not only avoid the fully enclosed fence structure, but also avoid using simple flower railings to make the balcony look empty.

To achieve this effect, the most ideal way is: the lower third of the balcony is a solid wall, and the upper two-thirds is a glass window, which should be opened frequently. In this way, not only will there be no "void under the knee", but also the geomantic omen of the house will not be affected because of "closing the door". The transparent balcony has a wide view, which is both beautiful and in line with Feng Shui.

Why can't the balcony be sealed? What material does the balcony use to seal the windows?

1, aluminum alloy window

As the name implies, aluminum alloy window is a window frame made of aluminum alloy building materials. Aluminum alloy windows are very common in life. The doors and windows made of this material are not only fashionable and beautiful, but also have strong anti-aging performance.

2. Broken bridge aluminum window

Broken bridge aluminum is to disconnect the aluminum alloy from the middle and connect the broken aluminum alloy with the hard plastic in the middle. As we all know, the heat conduction of plastics is obviously slower than that of metals. The hard plastic in the middle makes it difficult for heat to pass through the whole material, and the thermal insulation performance of the material becomes better, so the thermal insulation of the broken bridge aluminum is very good.

3. Plastic steel window

The sound insulation, sealing, anti-corrosion and heat preservation performance of plastic steel window will be better, but the cross section of this material is relatively large, which will affect the lighting and the owner's vision.

It is suggested that if the budget is sufficient, it is most suitable to choose broken bridge aluminum. If the requirements for heat preservation are not high, aluminum alloy with lower price can also be used.

What glass should I use to seal the window?

The thickness of conventional glass is 5mm, and 6~8mm thick glass can be used as required. Generally, the hollow layer of casement window is about15 mm. Generally, after vacuumizing, inert gas is filled for sealing, and desiccant is added, so that the glass will not be fogged and the sound insulation effect is good.

When the single-layer hollow exceeds 14mm, it has little effect on the thermal insulation and sound insulation performance, so the thicker the hollow layer, the better. If we pursue more effective sound insulation, it is best to upgrade to laminated glass or three-layer insulating glass.

What are the installation steps of window seal?

1. When installing, first check whether the window is qualified and damaged. Whether there are cracks in the glass.

2. Most of the existing windows are aluminum alloy windows, so the firmness of the windows must be ensured during installation, and the opening fan must have anti-falling measures to avoid falling off during use.

Step 3 Fill it with styrofoam

It is also the most important detail treatment when installing windows. After the window adjustment is completed, the gap needs to be filled with styrofoam, and the gap between the window and the wall needs to be filled with sealant. After the styrofoam is finished, the edge of the window frame needs to be coated with sealant, which is the key to prevent rainwater from infiltrating.

4, in the process of installation to do a good job of finished product protection, timely removal of garbage falling on the surface of doors and windows, timely repair the damaged protective tape and film.

If the balcony is sealed first and then tiled, it is possible to cover the big gap when tiling, and the waterproof effect will be better. Therefore, it is generally chosen to seal the balcony first and then stick bricks.

What should I pay attention to when sealing the window?

1, window hardware selection

In fact, it's not just the hardware of windows. In fact, the choice of all kinds of hardware in the decoration room, it is best to choose good quality, national standard hardware accessories.

The quality of window sealing comes largely from the quality of hardware. In addition to the brand, it depends on the feel. When we open the window, the slide rail is smooth and has a certain weight, feels full and has no jam, closes smoothly, feels like a handle, and has no obvious jam when locking with the window.

2. Time and rhythm of window sealing

Window sealing generally requires communication and docking with bricklayers in advance to avoid decoration conflicts between them. The formal decoration step should be to seal the window frame first, and then seal the glass.

3. Pay attention to the installation process

Window frame lap firmly, without looseness. Shake it by hand after installation to avoid obvious shaking. A good window should be very stable. At the same time, the details of wrapping are handled in place, the gap is completely filled with styrofoam, and the sealant is smooth and tight, with a width exceeding 2cm, without leakage or warping.

4. Leave room for maintenance

In the design of life balcony, washing machines are usually placed on the balcony, so it should be noted that the laundry cabinet should not be close to the glass of the window, and a distance that can accommodate one hand should be reserved, so that it will be more convenient for the window to have problems later.

Sealing windows is something that almost every owner needs to do, but when many owners understand the decoration, they find that many formal decoration companies do not seal windows.

The reason is that the decoration company does not have a permit for aerial work, and high school work refers to the work that is carried out specially or often at a height above the reference plane of falling height of 2 meters and may fall. Aerial work is a special operation, and you must hold relevant certificates.