How to install it after three months of renovation?

3-month completion decoration process guide

Complete the decoration process guide in 3 months and prepare before decoration.

A, define your own needs for decoration (about 7 days),

1. Define the decoration style you want to do.

2. Clearly sort out your requirements for the space functional area, and put forward suggestions for modification or pending.

3. Determine the electrical systems that will affect the hydropower design, such as floor heating, central air conditioning, fresh air system, soft water system, main light layout, whole house WIH, whole house smart household appliances, etc.

4. Determine whether to customize the whole house or make cabinets at the woodworking site. note:

* This decoration demand is for your designer, and her design based on your clear needs will be more accurate and efficient. Prepare before decoration.

Second, determine the budget scope.

First of all, you should be clear about whether you are all-inclusive, half-inclusive or clear.

Half-package: the decoration company will package the auxiliary materials and construction, and the owner will buy the main materials: the decoration company will package the main materials, auxiliary materials and construction; Owners will find decoration workers to carry out construction and buy auxiliary materials: floor, tiles, latex paint and other auxiliary materials: cement, sand, putty, gypsum board and so on.

Third, find a good contractor (about 7 days)

1. Design studio: strong design ability.

2. Decoration company: There can be two ways of cooperation: all-inclusive and half-inclusive. 3. Decoration team: find your own decoration team or temporary workers to decorate, that is, clear the package.

Four, residential property office construction procedures (half a day)

1. Before starting work, you should go to the residential property registration formalities and pay the decoration deposit. 2. Garbage removal matters should be discussed with the property, and some properties will help the owner find a garbage removal vehicle for decoration.

The renovation officially began.

Verb (abbreviation of verb) Demolition and renovation project (2-4 days)

1. Start to disclose

2. Demolition and transformation of the main body: shovel the wall skin, dismantle the wall, dismantle the heating, and replace the plastic steel window.

* At this time, you need to prepare to buy the air switch of the strong and weak electricity box in advance; Select the sanitary ware to be embedded.

Six, hydropower reconstruction construction (5-7 days)

1. Material input and inspection

2. Mark and locate the position of water pipe wires.

3. Water and electricity wiring

4. Water and electricity acceptance

5. Slot

If it is necessary to install central air conditioning, fresh air and floor heating, it is necessary to conduct on-site measurement and negotiate wiring construction after the formal hydropower transformation.

* What you need to do at this time is: choose and buy wall tiles, floor tiles, threshold stones, windowsill stones, shower water strips, floor drains, plastering lines, corner flowers, lamp plates, etc.

Hydropower transformation is the most easy stage to exceed the budget, so we must know a lot of hidden projects and precautions in advance.

Seven, water and electricity acceptance (1 day)

1. Before leaving the site, please ask the electrician to mark the wiring of the electric box. 2. Take a picture of the hidden pipeline of the whole house and leave the bottom to the master who wants to dig a hole to install household appliances.

* Water and electricity acceptance is very important, and there are many details to pay attention to, which are related to the later decoration stage.

Eight, bricklayer's stage (6- 10 days)

Install a package of pipes in the window 1- Waterproofing for kitchen and bathroom 1- Waterproofing for embedded parts in shower room 1- Waterproofing test for wall, brick and floor tile paving, installation of security door/windowsill stone-The bricklayer needs to make an appointment to customize the whole cabinet at this time, and communicate with the interior door to determine the carpenter's door-to-door time.

Nine, woodworking stage (7- 15 days)

The project mainly includes: gypsum board ceiling, curtain box, door opening correction (French arch door opening), fireplace, and hole plugging in the air (holes that do not need ventilation at home).

X petroleum engineering stage (5-8 days)

Basic treatment-leveling-wall consolidation-installing gypsum lamp panel/corner line, scraping putty, pasting gypsum corner flowers and lines, polishing, brushing primer and finishing paint.

Install customized cabinets, door covers, indoor doors, skirting lines of island platforms and local putty with large gaps.

What you need to do at this time is: buy sockets, switches, lamps, sanitary ware, shutters, make an appointment for an electrician to rework and complete the installation. Note: The acceptance work in petroleum engineering stage is very important. XI。 Complete installation (3- 10 days)

Install the switch socket lamp; Hardware sanitary ware installation, land reclamation and cleaning; Paint repair details; Electrical appliances enter the site; Furniture soft packing method