Li county medical and health care center construction project

The construction project of Lixian Medical Center has been approved by Lixian Development and Reform Bureau (name of project approval, approval or filing authority) with Li Fa Gaishen [2021] No.269 (approval name and number). The owner of the project is Lixian Lizhou Industrial Development Co., Ltd., the source of construction funds is self-raised and bank loans (sources of funds), and the tenderer is Lixian Lizhou Industrial Development Co., Ltd., the project has met the bidding conditions, and the whole process engineering consultation (including design service and cost consulting service) of the bidding project is now open.

2. Project overview and bidding scope

2. 1 project name: whole process engineering consultation of Lixian medical center construction project.

2.2 Project Location: Mengqian Town, Li County, Changde City

2.3 Project Overview: The construction area is 49,685 square meters. Mainly build 38,000 square meters of apartments for the elderly, with 1000 beds for the elderly, 9,829 square meters of medical technology building, 200 beds and private rooms 1856 square meters; And supporting indoor strong and weak electricity, water supply and drainage, fire protection, HVAC engineering, venues, greening, roads and so on. Details are as follows:

1 main project: the construction area is 49,685m2, of which: 4 5F apartments for the aged with a construction area of 38,000m2, with 1000 beds for the aged; 1 Building 5F has 9829 square meters of medical technology and 200 beds; Property 1856 m2. The plot ratio is 1. 136.

Decoration project: mainly the main decoration project. The decoration of the medical technology building meets the requirements of medical rooms, and indoor strong and weak electricity, water supply and drainage, fire protection, heating and ventilation works, etc.

3 Supporting projects: including site leveling 2843 1 m2, outdoor square and road 5660 m2, greening 2843 1 m2, power distribution project, etc.

Equipment procurement: 906 sets of medical equipment were purchased.

5. Access road: Considering the poor traffic conditions around the project area, based on the principle of saving investment and reducing cultivated land, He Huan levee is used to widen and transform the access road. The road runs north-south, with a total length of 1, 370 meters, which leads directly to the medical center in 207 national highway. The total design width is 8m, the roadway width is 7m, and the shoulders on both sides are 0.5m.. The pavement structure is asphalt. The plan requires the erection of a river-crossing bridge with a total length of 278 meters. The design adopts 9× 30m prestressed concrete box girder structure, with a total width of 8m and a clear width of 7m, and collision barriers of 0.5m on both sides. One-to-one LED street lamps with a distance of 28 meters are set on the west side of the road.

2.4 Service period: 60 calendar days.

2.5 Bidding scope: engineering consulting services for the whole process of this project, including:

□ Investigation service:/

Design service: □ Scheme design? Preliminary design? Construction drawing design? Including preliminary consultation, preliminary design and construction drawing design of all buildings and structures (including municipal roads and bridges), building engineering (including energy-saving design), structural engineering, decoration engineering and installation engineering (including electrical, water supply and drainage, fire protection, civil air defense, heating and ventilation, etc.). ), outdoor greening landscape, garbage station, fence, etc. (others)

□ Supervision service:/

Cost consulting service:? Prepare design estimates? Compilation of bill of quantities and tender control price-cost control in the whole construction process-settlement audit? The main work content of cost consulting service: the preparation of design budget, bill of quantities and tender control price. (others)

□ Project management services:/

□ Tendering agency service:/

□ Special engineering consultation:/

□ Project financing consultation:/

□ Information technology consultation:/

□ Risk management consultation:/

□ Post-project evaluation consultation:/

□ Building Energy Conservation and Green Building Consultation:/

□ Engineering insurance consultation:/

□ Engineering inspection service:/

□ Operation and maintenance management consultation:/

□ Other services:/

2.6 Subcontracting is prohibited in this service contract. The winning bidder? Service contract □ Subcontracting/service content shall be completed completely independently.

3. Qualification requirements

3. 1 The bidder shall be an institution or institution legally registered in People's Republic of China (PRC) with independent legal personality, and its legal person license or business license is valid.

3.2 The bidder shall meet the following requirements:

3.2. 1 Qualification requirements: it has the comprehensive Grade A qualification of engineering design or Grade A qualification of engineering design and construction industry (construction engineering) issued by the competent department of housing and urban and rural construction, Grade B or above qualification of road engineering major of engineering design and Grade A qualification of bridge engineering major of engineering design and municipal industry, and the qualification certificate is valid;

Note: The qualification type shall be set from one or more qualifications such as survey, design, supervision and cost consultation according to the bidding scope, but the potential bidders shall not be restricted or excluded by unreasonable conditions.

3.2.2 Financial requirements:

Not available.

□ Provision: No loss (less than/year) in recent/year or since its establishment.

Note: the financial requirement time is generally limited to 1~3 years.

3.2.3 Reputation requirement: The enterprise (including consortium members) has not been disqualified from participating in the bidding of legally required projects in this area by the competent department of housing and urban-rural construction.

3.2.4 Performance requirements for similar projects:

Not available.

□ Provisions: There shall be no less than /( 1 to 3) similar project achievements within one year from the date of publication of the tender announcement.

Performance of similar projects means:/and having corresponding capabilities in terms of personnel, equipment and funds.

3.2.5 Requirements of the person in charge of the project: the person in charge of the project to be appointed shall have the national first-class registered architect qualification certificate issued by the construction administrative department (the name of the registered company of the registration certificate of the person in charge of the project shall be the same as the name of the bidder) and the senior engineering title; The person in charge of design and cost shall not concurrently hold the post. When the consortium bids, other personnel may be appointed by all members of the consortium except the project leader.

3.2.6 Requirements for other key personnel: The person in charge of the design to be appointed shall have the national first-class registered architect qualification certificate issued by the construction administrative department, and the name of the registered unit shall be the same as that of the bidder (in case of consortium, the unit undertaking the design task).

The person in charge of the proposed cost has the national registered cost engineer qualification certificate or the first-class registered cost engineer qualification certificate issued by the construction administrative department, and the name of the registered unit must be the same as that of the bidder (in the case of a consortium, the unit undertaking the cost consultation task).

Other requirements:

(1) Enterprises outside Hunan Province must register the basic information of enterprises entering Hunan Province according to the requirements of Xiangjian 20 15 190 (subject to the query of "Hunan Housing and Urban-Rural Construction Network") or have an intermediary service registration certificate (within the validity period);

(2) The authorized client, project leader, design leader, cost leader and professional technicians who participate in this bidding must be on-the-job personnel of this enterprise.

(3) Legal persons, other organizations or individuals who have an interest in the tenderer and may affect the fairness of the tender shall not participate in the bidding. If the person in charge of the unit is the same person or different units with holding and management relations, they shall not participate in the bidding of the same bid section or the bidding of the same project subject to tender without dividing the bid section;

(4) The project leader, design leader, cost leader and other professional and technical personnel shall not be the same person.

3.3 The consortium bid is accepted (accepted or not) in this tender. The consortium bid shall meet the following requirements:

The bidder shall make it clear that the unit with engineering design qualification is the lead unit of the consortium. The number of members of the consortium shall not exceed 2. The same professional service is not allowed to be shared by two units. All parties to the consortium shall sign a consortium bid agreement, clearly defining the rights and obligations of the consortium leader and all parties, and regard the consortium agreement as an integral part of the bid documents. All parties to the consortium are not allowed to participate in the whole bidding process of engineering consultation of this project alone or in other consortia in their own names.

In the form of a consortium, the bid bond shall be submitted in the name of the leader of the consortium and shall be binding on all members of the consortium. The legal representative of each member of the consortium shall issue a power of attorney to authorize one of the leading parties to act as an agent to handle the bidding matters. The power of attorney shall be signed by the legal representative of each member of the consortium or stamped with the official seal of the enterprise as a legal person.

In the case of bidding in the form of consortium, the performance of the whole process of engineering consulting shall be subject to the performance of the lead unit, and the performance of the special service shall be subject to the performance of the consulting unit undertaking the service. If the whole process engineering consultation of the project is completed in the form of consortium, the lead unit will get the whole process engineering consultation performance, and the member units will get the special service performance undertaken. .

4. Economic compensation for technological achievements

The method and standard of economic compensation for the technical achievements in the bidding documents of unsuccessful bidders that meet the requirements of the bidding documents: no compensation.

5. Acquisition of bidding documents

If you are willing to bid, please download the electronic bidding documents of this project from May 6, 2022 to May 20, 2022 at Changde Public Resources Trading Platform (\) (name and website of electronic bidding trading platform).

6. Submission of bid documents

6. 1 The deadline for submission of electronic bidding documents (bidding deadline, the same below) is 09:30 on June 8, 2022, and the bidder shall submit the electronic bidding documents through Changde Public Resources Trading Platform (\) (name of electronic bidding trading platform) before the deadline.

6.2 The electronic tendering and bidding trading platform will refuse the bid documents delivered after the deadline.

7. The media that issued the announcement

This tender announcement is published on Hunan Bidding Supervision Network and Changde Public Resource Trading Network (the name of the media that issued the announcement).

8. Administrative supervision department and contact information

This bidding activity is supervised by Lixian Construction Project Bidding Management Office (Administrative Supervision Office), and the contact information is 0736-3224277.

Tenderee: Lixian Lizhou Industrial Development Co., Ltd.

Address: Zhongyuan Street, Li County

Contact: Hong Yan

Tel: 0736-3658587

Bidding Agency: Hunan Li Peng Project Management Co., Ltd.

Address:No. Yandian Road 1, Qiaojiahe Neighborhood Committee, Linan Town, Li County

Project leader: Peng Wuhua

Tel: 0736-322 1688

Chuan Zhen: 0736-322 1688