There is a leak in the ceiling. How can I make it up to you?

If the house is still under warranty, the owner should promptly notify the property to carry out maintenance to avoid danger. When the ceiling is asbestos, it is hung one by one. Take a piece and see where the water pipe leaks:

1, the ceiling leaks-there is always some water on the ceiling.

The first case is that the waterproof layer of the bathroom and kitchen upstairs is not done well. In this case, it is necessary to knock off the floor tiles and waterproof them again.

The second situation is: the upstairs bathroom or kitchen floor drain is blocked, and the accumulated water leaks through the casing of the heating pipe, resulting in the ceiling being wet. The maintenance method is to fill the gap between the heating pipe and the casing of the upstairs residents, and then fill the gap between the casing and the heating pipe with greasy putty.

2. Water seepage on the wall-there are many reasons for mildew spots and water seepage on the wall, which is more troublesome to remedy. The most important thing is to find the right reason and prescribe the right medicine.

The first case: the concealed pipe of the upper water pipe is not installed, the water pipe is inferior, and the galvanized pipe is rusted and aged, which may lead to water leakage. This situation is very troublesome, and it can only be corrected where it is leaked and eliminated where it is changed.

In the second case, the waterproof layer height of the light wall in the shower area can't reach 1.8m, so the light wall is easy to get wet in the humid environment all the year round. You can change the nozzle angle during the shower to avoid water spraying on the light wall; Or refit the shower head to the load-bearing wall, and there is no light wall around it; It's best to knock off the wall brick and make it waterproof again.

The third case: cracks appear in the outer wall, which causes asbestos in the wall to be wet all the year round. Asbestos in the wall is not easy to dry after absorbing rainwater. Year after year, the inner wall will be soaked with water, moldy and powdery. When this happens,

The fourth case: when building a house, the construction hole of the external wall is not sealed. Once it rains, the rain will splash into the construction hole, causing the internal wall to regain its moisture, and the wall will appear band-shaped or ring-shaped traces after drying.

3. Water seepage at the window-on rainy days, water seepage at the window leads to damp inner wall, which leads to mildew and powder loss. The most common reason of window seepage is that the seal between window frame and wall is not handled well. In this case, it is enough to seal the window frame and the wall with sealant (general glass glue).