Hohhot Liang Hai Property Telephone

It seems that you are a forward-looking person who is good at fighting fires. The specific method depends on your investment. According to the conventional automatic sprinkler system, it should be composed of the following parts: water supply facilities (water pump, pool, high position, water tank, etc. ), wet alarm valves, water flow indicators, valves, pipelines, closed nozzles, etc. For a built building without relevant supporting facilities, according to the requirements of the code, the cost is very high. If it is not for fire inspection but for fire safety, I suggest you make a simple home sprinkler system, as many family workshops in Huzhou, Zhejiang do. You can take a set of 100 square meter pipes at will. The water supply is from domestic water, and the arrangement between nozzles is suggested to be controlled within 3 meters (the number of 3 meters is not very strict, this is only determined according to actual work experience. In engineering design, this figure is determined according to the flow and risk level. ), the pipeline adopts galvanized steel pipe (which is more resistant to burning than rubber hose when it is on fire), and the pipe diameter is taken according to the number of nozzles. The more nozzles, the thicker the pipe. See if there are any places that are not in place. You can also search online for the relevant provisions of the wet automatic sprinkler system in the Code for Design of Automatic Sprinkler System.