Changan CS35 P 100 1 how to solve the fault code?

First, check the water and oil. If there are no problems with these two items, there are problems with the oil circuit and various electronic sensors.

Fault code introduction

Now there are all kinds of sensors in the car, which can transmit the working information of all parts of the car to the control unit of the car at any time. After analysis and judgment, the control unit sends a series of instructions to the actuator to make the car do various actions such as refueling, fuel cut-off, gear shifting, braking and steering, so as to help the driver control the car better.

If the information is not received or the wrong information is received, the control unit will store this information, that is, the fault code; Then notify the driver in some way, such as lighting a fault light or sounding an alarm.

cause

The signal transmitted by the sensor is wrong, which is usually the problem of the sensor itself or the circuit. Control logic error, that is, the information received by the control unit conflicts with each other and cannot be executed. At this time, the fault code will also be stored, but the fault position displayed at this time is not necessarily accurate, and we need to analyze and judge according to the control logic of relevant components.

Most of them can correctly identify the possible causes and parts of the fault, but there will also be misjudgments, which will lead to misleading.