How to insert the meter card?

According to the experience of querying Baidu, the card insertion method of electricity meter card can refer to the following:

1. When the customer sends electricity, please remove the plastic dust cover of the socket of the electricity meter card first;

2. Then hold the electricity meter card and smoothly insert the notch of the electricity meter card upward into the jack, some of which are vertical, with the chip side inward;

3. Wait for 3-4 seconds, and the power storage indicator on the left side of the jack will light up, showing the cumulative sum of the remaining power in the electricity meter you purchased. At this time, it is proved that the power you purchased has entered the meter, and the power storage indicator will automatically go out after 30 seconds;

4. Then pull out the electric card, cover the dust cover, and the power transmission process is over;

5. After each purchase of electricity, before the next purchase of electricity, the electricity in the last electricity card must be input into the electricity card table before the purchase of electricity, otherwise the last electricity will be lost and the electricity purchased this time cannot be input into the electricity card table;

6. If you want to know the electricity consumption, insert the electric card into the socket of the electric card meter, and the electricity storage display screen will light up, showing the remaining electricity in your meter, and it will automatically go out after 30 seconds;

7. When there is 20 kWh left in the electricity storage device, the indicator light of the electricity meter will light up for a long time to remind you to buy electricity quickly. When the power is still 10 kW, the meter will automatically cut off power, give an early warning and buy electricity quickly. At this time, you plug the electric card into the socket of the electric card meter and the power supply will be restored. When the last 10 kwh is used up, the power supply of the meter will be automatically terminated until the newly purchased power is input.

8. The customer's electricity load cannot exceed the rated capacity of the electric card meter. The rated capacity of 5( 10)A is 2200W, and the rated capacity of 10(20)A is 4400W W. If the customer's electricity load exceeds the rated capacity of the meter, the meter will be automatically cut off. When the customer's electricity load drops to the allowable range of the rated capacity of the electric meter, the electric card is smoothly inserted into the socket of the electric card meter to restore power supply;

9. Customers who have newly installed the electric card meter (there is a pulse light in the lower left corner of the electric card meter) must insert the card once every time before purchasing electricity, so as to read back the actual electricity consumption of customers.