13 methods of dredging toilets

There are 13 ways to clear the toilet. In our life, many friends will install toilets at home, so squatting in the toilet is very troublesome. Therefore, we need to learn some ways to clear the toilet in our life. Below I sorted out 13 ways to clear the toilet.

13 methods of cleaning toilets 1 1. Many times, the toilet will pass by itself when it is flushed with water, especially for soluble or dispersible items such as soil and paper. If it is greasy, pour a pot of boiling water to melt. Or buy some caustic soda, boil water to melt it, pour it into the toilet, and it will pass in ten minutes. Or use the right amount of oxalic acid to dredge (you can also use oxalic acid to clean the toilet at ordinary times, just to neutralize urine alkali and make the toilet smooth).

2. Put the hook made of iron wire into the sewer and stir it, so that the dirt is wound on the iron wire, and then pull out the iron wire to drag the dirt out of the sewer. Or find a bamboo stick half an inch wide and put it in the toilet to dredge it.

3. Fill the toilet with half water and aim at the hole in the sewer with a round mop or a round soft brush. You can also use an old mop. After filling half the water, press the hole hard with a mop a few times. Move quickly, and pressure should be used to get it through. Or go to the market to buy one, then give it a few times, and use it once every half month, so it won't be blocked.

4. Dredge with a beverage bottle, cut off the bottom of the finished Coca-Cola bottle, put it upside down in the toilet, and hold the bottom of the bottle with your hand and pump it up a few times.

Wrap a rag on the air pump, then pour some water into it and start pumping for a while.

6. Find a hose, connect one end to the tap water, wrap the other end with a rag and insert it into the sewer pipe, then turn on the tap water. The principle is that the tap water pressure is about 4Mpa, which can completely flush the sewer. Remember not to let water leak at both ends of the hose to maintain the highest pressure.

7. You can buy a loach and put it in the squatting pan, and pour warm water into the toilet. When the weather is hot, the loach will go down desperately to clear the toilet.

8. Use the toilet, which is a tool specially invented to clear the pipe blockage. The front end of the toilet is a flexible spring, and the length of the spring is determined according to the height of the blockage from the toilet mouth. After tightening the screw, press the spring into the pipe until the pipe is unblocked or the dirt is taken out.

9. You can also use pipeline dredging agent, which is a powdery dredging product and can be used to dredge any pipeline. Put dredging agent in three times, about 50g each time, with an interval of 1-3 minutes. After all investment, stay for three minutes and rinse with hot water, and finally stay for 10 minute. After washing with clear water, it should clear the toilet.

10. If the above methods do not solve the problem, you can call a professional master to dredge it to avoid further blockage of the toilet.

13 methods of cleaning toilets 2. Blockage in normal use

This kind of blockage is usually the easiest to remove, because the cause of the blockage is stool, and some people like to throw paper into it.

Some people have hard stools and have not been dissolved by water when they fall into the toilet. They were blocked in the middle of the toilet when they flushed it with water.

For this kind of blockage, you can prepare a toilet plunger at home, or go to the hardware store to buy one. Then aim the rubber end of the toilet plunger at the drain of the toilet, press it with the toilet plunger, and generate suction in the toilet again to suck up the blocked things in the toilet. With the help of the pressure of the water in the toilet, the toilet is connected.

Attention should be paid to the following problems: in the process of suction, press down as slowly as possible, so that the rubber port of the toilet plunger and the drain port of the toilet can be sealed as much as possible, with fewer gaps, and the probability of success is higher.

Second, the toilet is blocked by something that has fallen in.

If this problem is solved, the toilet must be removed, the blocked things taken out, and then the toilet must be reinstalled. Need more professional master to carry out all kinds of dredging business and installation and maintenance services.

Third, other reasons for toilet blockage.

There are many kinds of problems with toilet blockage: it is blocked by soft objects (such as hair and towels). ), water pollution, mud blockage, possible oil pollution (some people like to pour leftovers into the toilet, which is easy to produce oil pollution inside.

13 tips to solve toilet blockage and dredge.

1, you can find a bamboo stick half an inch wide and stick it into the toilet to clear the problem.

2. Many times when the toilet is flushed with water, it will pass by itself, especially for soluble or dispersible items such as soil and paper. If it is greasy, pour a pot of boiling water to melt.

Buy some caustic soda, boil water to melt it and pour it into the toilet. Everything will be connected in ten minutes.

4. Looking for a property, they have the responsibility and obligation to help you.

5. Buy a scorpion and do it yourself.

6. Use a proper amount of oxalic acid (you can also use oxalic acid to clean the toilet at ordinary times, just neutralize it with urine alkali to make the toilet unobstructed).

7. You can buy a loach and put it in the squatting pan, and pour it into the toilet with warm water. When the weather is hot, loach will go down desperately to build a toilet. If it's not difficult, I think it usually works.

8, the old mop, fill the toilet with half of the water, and then use the mop to press the hole a few times, move quickly and press it over.

9. You put half of the water in it, aim it at the hole in the sewer with a round mop or a soft brush with a round head ~ pound it hard.

10, insert a long hose, ventilate, and then flush; I tried it, and it worked well.

1 1, first prepare an air pump, wrap a rag on it, then pour some water into it and start pumping for a while.

12, I had a terrible experience with this. You went to the grocery store and bought a simple toilet, which is made of plastic. 2 yuan filled the squatting pan with water, and then used the toilet suction basin to aim at the squatting pan and suck several times. Is through its air pressure.

13, if you don't want to solve it, or if all the above methods have been tried, it doesn't work, then it is easiest to find a professional to dredge the pipeline.

13 Method of cleaning toilet 3 1, use adhesive tape.

First, prepare a roll of 30cm yellow tape, and then clean the edge of the toilet with toilet paper or dry rag without moisture and stains, so as to ensure that the tape can be stuck firmly. Next, stick the adhesive tape on the surface of the toilet, and smooth the corners by hand. There can be no air leakage. Then waterproof, the tape bulges when pressed, and the glue is pressed by hand. After repeated several times, the toilet will be easily cleared.

2, wash more, or buy caustic soda.

If the toilet is blocked, it is because of soluble things such as toilet paper and dirt, or things that are easy to be scattered. It doesn't matter, as long as you flush more, it will often pass. Or buy some caustic soda, boil the water, melt it and pour it into the toilet, and it will be ready in ten minutes. In fact, oxalic acid can also dredge the toilet and neutralize urine alkali to achieve the purpose of dredging.

3. Use plastic water pipes.

You can find a plastic water pipe, one end of which is connected with tap water, and the other end is plugged into the toilet, and then the toilet mouth is blocked to prevent dirty water from flowing out and polluting the ground. Then turn on the tap water, which will use water pressure to dredge the sewer pipe. There is a similar method, which is to use a long soft snorkel, then constantly ventilate and then rinse. This effect is very good.

4. Dredging in spring.

This toilet is blocked. The trick is simple. If there is a hardware store or grocery store nearby, you can buy a spring dredge to dredge the toilet. Simple, convenient and cheap to use.

5, dry and wet vacuum cleaner.

If you have a vacuum cleaner that can be used both wet and dry at home, be sure to use it both wet and dry. You can suck up the water in the toilet first, then put the soft tail pipe into the pipe, enclose the surrounding gaps with rags or other items, and then suck it with electricity, which is very likely to suck out the blockage.

6. Professionals.

If the blockage is caused by hard objects such as combs and bottle caps, it can't be solved by traditional methods. You need to find a professional dredge to remove the toilet and take out the hard objects, so as to completely solve the blockage problem.