What is the management system of elevator triangle key?

Elevator triangle key management system

1. The triangle key must be used by trained personnel who have obtained the operation certificate of special equipment. Other personnel shall not

Use.

2. The triangle key used must be accompanied by a safety warning sign or posted with a warning sign around the triangle keyhole; be filled/suffused/brimming with

Non-professionals are forbidden to use the triangle key, and the position of the car should be determined before opening the door.

3. The user or the owner must designate one or more persons with certain mechanical and electrical knowledge as elevator pipes.

Manager, responsible for the daily management of the elevator; In units with a large number of elevators, the elevator administrator shall obtain the operation certificate of special equipment.

4, the elevator administrator should be responsible for the collection and management of elevator keys (including control box, computer room door keys, electricity

Lock key, hall door unlock triangle key); If the elevator administrator changes, it is necessary to do a good job of handing over the triangle key.

5. It is forbidden for anyone to give the triangle key to irrelevant personnel without authorization; Otherwise, cause an accident, after

Fruit conceit.

6, the correct use of triangle keys:

(1) When opening the hall door, confirm the position of the car first; When the car is not on the floor, prevent the car from falling.

Falling accident;

(2) Turn on the lighting of the hall door, remove all kinds of sundries, and pay attention to other irrelevant people around; (3) Insert the triangle key into the unlocking hole and confirm the unlocking direction;

(4) The operator should stand still, keep the center of gravity, and then unlock slowly according to the unlocking direction; (5) After the door lock is opened, first push the hall door open with a slit 100mm wide, and remove the triangle key.

Observe the situation in the hoistway, and pay special attention to the fact that the hall door cannot be opened too wide at this time.

(6) After unlocking, the operator shall confirm that the hall door has been reliably locked.