Installation method of electric sliding door

Lead: We often see the use of electric sliding doors in our lives, especially in public places. For us, we only know how the electric translation door works and how to operate it, but when we just bought it back, not many people know how to install it, so today Bian Xiao will introduce the installation method of the electric translation door to you. Friends who want to know come and learn the installation method of electric sliding door together!

Step 1: First remove a piece of wood from the end of the machine head, and then pull the door row out of the box.

Step 2: Find the machine key after pulling it out. Generally, the machine key is tied to the movable circular tube of the crossbar at the end of the door row and tied tightly with a bandage.

Step 3: Open the machine head cover with the key and take out the white box next to the motor, which contains the wireless remote controller *2, the wireless console controller * 1 and the clutch key * 1.

Step 4: The function of the wireless remote controller is to control the operation of the telescopic door, which is small and convenient to carry. The gatehouse is controlled by console, which is convenient for the daily operation of security personnel.

Step 5: If "the gear turns but the shaft doesn't turn" occurs when the door body is remotely controlled, it means that the motor clutch is not closed. The hexagonal clutch key in the box is inserted into the shaft end of the motor binding chain, and the hexagonal groove is recessed inward. Insert the clutch key and rotate it by 180 degrees to open the clutch.

Step 6: After the motor debugging, fold the door row against the wall (where the door body needs to be fixed). There are three fixing pieces at the bottom of the end of the door body. The first one is that the horizontal pipe in the middle of the door row has an angle code that can be fixed on the wall.

Let's go There is a horizontal square tube at the bottom of the end of the door row, and there are two stainless steel corner codes at the left and right ends of the inner side, which can fix the door body on the ground (suitable for installation places without wall columns).

Step 7: After the door body is folded against the wall, take the center of the door body as the standard, and bury a circular magnet in the middle of the door row at intervals of 20-25 cm along the straight lines on the left and right sides of the left and right walls. Step 8: After burying the round magnet, bury a square magnet directly below the headrest position when closing the door.

Step 9: After the door body is fully unfolded, bury a square magnet directly below the butt joint position of the nose 30~ 100mm after the nose is fully unfolded.

Part 10: bury a square magnet at the bottom of the nose (corresponding to the white tube [infrared reed switch]) at a distance of 1000mm from the circular magnet (middle of the track).

Step 11: Connect 220v power supply (2.5m2 hatchback power supply) with a voltage not lower than 180. The three power cords correspond to red (live wire), yellow (ground wire) and blue (zero wire) respectively. Connect three wires (the ground wire can be disconnected) and you can get it!

The installation method of electric sliding door has been clearly introduced to you above. I believe your friends have learned how to install the electric sliding door after reading it! In fact, the installation process is not difficult. As long as we follow the correct installation tutorial, we can all install successfully! As an ordinary person, knowing the installation method of electric translation door can not only enrich their knowledge, but also come in handy at key times. I hope Bian Xiao's explanation today will be helpful to everyone.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~