Huawei Optical Cat Dual-network Convergence Settings

Click System Tools -—ONT Certification.

The steps are as follows: 1. First, connect the computer and Optical Cat to stand-alone mode, open the browser and enter 192. 168. 1 (as is the case with general home gateways) to enter the Optical Cat login page.

2. After successfully logging in to Guang Mao, click on the network above, and the interface shown in the figure below will appear. Select INTERNET_B_VID_4 1 from the drop-down box of connection name, bind to the LAN port, check the network port 1, 3, 4, and click Save Application.

3. Select pppoe as encapsulation type, connect mode routing, check Enable vlan, and fill in VLAN id 4 1. User name and password are broadband accounts and passwords provided by network service providers. For Lan port binding, select the ports 1, 3 and 4 to be checked, and for SSID binding, select SSID 1. You can choose any number between 1 and 4094 for the multicast Vlan.