Job Recruitment Website - Property management - Is there a distance requirement for the property parking line?

Is there a distance requirement for the property parking line?

There is a distance requirement for the property parking line.

The size of parking spaces can be divided into four grades. For cars with a length of less than 6m and a width of less than1.8m, the distance between cars shall not be less than 0.5m, and the distance between cars and walls and parking spaces shall not be less than 0.5m.. If the vehicle length is more than 6 meters and not more than 8 meters, and the vehicle width is more than 1.8 meters and not more than 2.2 meters, the vehicle spacing shall not be less than 0.7 meters. The corresponding specifications of the return section are to meet the needs of one-time rotation of a car. The parking lot, which is dominated by small cars, should be 2.5~2.7×5~6 meters in scale, with the width of one-lane turning lane not less than 3.5 meters and the width of two-lane not less than 5 meters. For safety reasons or parking medium and large vehicles, the parking lot should be more than 6 meters. In 2004, the national first-class registered architect examination site mapping test took a parking lot design, and the preset parking space size was 2.5×5 meters. The two-way turning lane is preset to 5 meters.

The architectural dimensions, length and width of parking spaces in open-air parking lots are drawn as follows:

1, straight parking marking method, 2.5 meters wide, 5.0 meters long-5.5 meters, of which 5.3 meters is often used as the planning size, which can not only ensure that the doors of two adjacent cars can be spacious after parking, but also fully meet the length of common cars in the market. Suitable for units, property communities and underground garages.

2. Inclined parking space marking method. The standard size of the parking space is 2.8m * 6m, and the inclination angle is 60.

3. Standard dimensions of parking spaces for CMB trucks: 3.0m wide and 6m long.

4. Standard size of bus parking spaces: According to the current bus design standards, it is generally around 10 m-12 m, so the width is guaranteed to be 4 m, and the length of parking spaces is determined by considering the turning radius.