Job Recruitment Website - Property management - Can the renovation of blank houses be changed to huxing?

Can the renovation of blank houses be changed to huxing?

Blank house decoration can be changed to huxing, but try not to change it, because it is afraid of affecting the bearing wall, and the demolition of the bearing wall will affect the structural safety of the whole house. Whether the wall between the balcony and the living room can be removed depends on the specific situation. Generally speaking, the wall here is not a load-bearing wall, but a shear wall, which still bears horizontal load and cannot be changed.

What should I pay attention to in apartment decoration?

1, design rationality

The renovation of housing units must follow the principles of interior design and be reasonable. We must rebuild the apartment according to a more reasonable design. If the room type transformation does not bring new functions or improve functions, then the room type transformation itself is unnecessary. For example, some kitchens with frequent operations will cause serious indoor pollution if they adopt open design.

2, Huxing transformation must be harmless to others.

At present, the country has banned the use of red bricks in some high-rise buildings, although there are certain environmental considerations (banning red bricks plays a great role in protecting cultivated land), there are also bearing capacity factors. Some floors are designed according to light weight, and red bricks are widely used indoors. Once it exceeds the bearing capacity of the floor, it may cause harm to others.

3. Destroy the original infrastructure

Be careful not to tear down the load-bearing wall, and also make clear the restrictions of the original pipes, wires and floors. Some high-rise buildings prohibit the use of red bricks, because once the load-bearing capacity of the floor is exceeded, it may cause harm to others.

Matters needing attention in decoration and wall demolition

1.

The fence was safely removed, but the later repair work can not be ignored. For example, when the original wall is demolished and a new wall is built with bricks, braces should be set on the new wall. "Bracing" is the construction method of the joint between the old and new walls, that is, the new and old walls are pulled with steel bars to ensure the stability and seismic capacity of the walls.

2. Before tearing down the wall, it should be reported to the property for approval.

Under normal circumstances, when the building is completed, the original design unit will leave a drawing for the property management company. The thickness and materials of various walls such as load-bearing walls and non-load-bearing walls are clearly marked on the drawings. According to the drawings, the property management company can determine which walls can be demolished. Therefore, before the wall reconstruction, the owner must submit the construction drawings given by the designer to the property management company, and the construction can only begin after the property is approved.