Parking space marking standard for residential quarters

The standard dimensions of marked parking spaces are as follows:

1, straight parking marking method, 2.5 meters wide, 5.0 meters long-5.5 meters, of which 5.3 meters is often used as the planning size, which can not only ensure that the doors of two adjacent cars can be spacious after parking, but also fully meet the length of common cars in the market. Suitable for units, property communities and underground garages.

2. Inclined parking space marking method. The standard size of the parking space is 2.8m * 6m, and the inclination angle is 60.

3. Standard dimensions of parking spaces for CMB trucks: 3.0m wide and 6m long.

4. Standard size of bus parking spaces: According to the current bus design standards, it is generally around 10 m-12 m, so the width is guaranteed to be 4 m, and the length of parking spaces is determined by considering the turning radius.

Standard parking area

The design standards of garages and parking lots in China's building codes are complicated and divided into four levels. There is no so-called "standard parking space size", only the corresponding minimum size is specified. If the vehicle length is not more than 6m and the vehicle width is not more than1.8m, the distance between vehicles shall be not less than 0.5m, and the distance between vehicles and walls and parking spaces shall be not less than 0.5m..

If the vehicle length is more than 6 meters and not more than 8 meters, and the vehicle width is more than 1.8 meters and not more than 2.2 meters, the vehicle spacing shall not be less than 0.7 meters. Among them, the corresponding specifications of the turn-back section are to meet the needs of one-time turnover of a car, which actually provides different sizes of looseness for different types of parking lots.