How to use Carrier Air Conditioning Control Panel Detailed explanation of the operation method of Carrier Air Conditioning Control Panel

Nowadays, no matter what market, the competitive pressure is great, and so is the electrical appliance market. Carrier is a very famous brand in the electrical appliance market, especially its air conditioner, which is deeply loved by consumers. Now many people will choose carrier air conditioner, so do you know how the carrier air conditioner control panel operates? It is very helpful for us to know the operation process of carrier air conditioning control panel. This article will introduce the operation process of carrier air conditioning control panel. Welcome to read!

1, switch: as the name implies, start and close; 2. Mode: In the mode selection, click to switch between warm air and cold air; 3. Wind speed: The wind speed of central air conditioning is generally divided into four grades: high speed, medium speed, low speed and automatic. Refrigeration and heating can be adjusted according to individual needs. Click to switch gears; 4. Temperature adjustment: The temperature is adjusted by two buttons, one for heating and the other for cooling. The maximum setting of central air conditioning is 30℃, and the minimum setting is 16℃.

The central air conditioner is controlled by wired thermostat and wireless remote controller. The host thermostat is installed on the wall below the indoor host and directly controls the switch of the host. The thermostat can set the temperature and timing, and select the operation mode (refrigeration, heating, dehumidification, air supply, sleep, etc. ); Using a wireless remote controller to remotely control the thermostat of the host within a distance of about 5 meters can also achieve the purpose of controlling the host.

After using Carrier air conditioner, the temperature of each room can be adjusted freely. Home central air conditioning is basically controlled by a single family. The main control valve of each household is located in the outdoor pipeline well, and it needs property professionals to open or maintain it. When entering the room, each fan has its own on-off valve, and the owner usually keeps it normally open after pressure test when handing over the house. Each room is equipped with a manual air outlet or an electronic thermostat, and users can adjust the temperature of each room at will. Note that when adjusting the temperature, the indoor temperature should be set at about 24℃-28℃, and the temperature difference between indoor and outdoor should not exceed 7℃.

After reading the operation flow of the carrier air conditioning control panel I introduced above, you should be able to master some basic operations of the control panel, so that you can operate some carrier air conditioners. In fact, the operation methods of most brand air conditioners are basically the same, but the appearance of buttons and the design of panels may be a little different.