What form should I use to clean the external wall?

Question 1: What is the external wall cleaning quota? In case of cleaning, the repair quota 15- 1 17 applies. I hope it works, but if it doesn't, don't scold me.

Question 2: What is the quota of the external wall cleaning package? 1. Clean the wall and brush 1:3 cement mortar with thick interface.

3, 5-60 thick polystyrene board, full of glue or glue,

Around the doors and windows, the edge of the building and other parts, the external wall cleaning auxiliary tool is now Lida electric hanging basket.

Install the plastic anchor bolt for drilling, with the middle distance @ "500".

4. The surface of polystyrene board shall be polished flat and rough, and cleaned.

5, 5 thick plaster mucilage, daub twice, flattening in the middle.

One layer and two layers of alkali-resistant mesh cloth

Step 6 Apply elastic primer

7. Scrape flexible waterproof putty

8. Spray bright paint twice.

Question 3: What is the quota for cleaning external walls? Urgent ~ ~ ~ find someone to help? ! ! ! Thanks to 1, clean the wall and brush the interface mortar.

2, 5 thick 1:3 cement mortar

3, 5-60 thick polystyrene board, full of glue or glue,

Around doors and windows, building edges, etc.

Install plastic anchor bolts in the borehole with the middle distance of @ "5004", and the surface of polystyrene board shall be polished and cleaned.

5, 5 thick plaster mucilage, daub twice, flattening in the middle.

One layer and two layers of alkali-resistant mesh cloth

Step 6 Apply elastic primer

7. Scrape flexible waterproof putty

8. Spray bright paint twice.

Question 4: What tools do you need to clean the external wall? 1. Working rope: nylon material, specification: 20mm in diameter. Function: mainly used for hanging and climbing under the hanging board seat board. The working rope is connected with the hanging plate through the movable joint in the sliding buckle, forming a series of hanging plates at high altitude. The lifeline is connected with the self-locking hook on the safety belt of aerial workers, which constitutes the safety system of aerial workers.

2. Safety rope: made of high-strength steel wire, specification: diameter: 18mm-20mm, function: mainly used for working rope. High altitude personnel are hung on the working rope through the seat plate, and the self-locking buckle of the safety belt is connected with the safety rope with the self-locking device, which can ensure the safety factor to be improved.

3. Electric hanging basket: Function: When hanging at high altitude, people at high altitude will sit on the hanging plate and slide down. The breaking load of the anti-skid seat plate is greater than 4400 Newton.

4. Seat belt: made of fiber. The safety belt consists of two shoulders and a belt, which is connected with the working rope through a self-locking hook.

5. Self-locking device: made of stainless steel. Function: Connect the safety belt and safety rope. When the working rope breaks, the self-locking device of the self-locking hook will self-lock due to the weight of the human body, so that the falling person is stopped by the lifeline.

6.U-clip: It is made of 16mm high-strength steel and connected by bolts and pins.

7. Glass tool kit: including sprinkler, glass scraper, marble scraper, telescopic rod, absorbent sponge and rubber strip. Function: Used for the surface of various mirror objects.

8. High pressure resistant water pipes: transparent plastic hoses and high pressure resistant hoses.

Question 5: What tools do you need to clean the external wall? External wall cleaning: 1. Hanging board at high altitude (rope method): workers use hanging board (rope) to slide down to the designated position for construction. This construction method has the characteristics of convenience, flexibility and high safety factor. At the same time, it occupies less resources and can minimize the impact on the daily work and life of the owners. 2. Hanging basket method: Set a hanging basket on the roof to transport workers to the designated location for construction. This construction method has low cleaning efficiency and high cost.

3. High-altitude spider car: use platform equipment such as spider car and lift car to transport workers to designated places for construction work. This construction method has great limitations and is generally suitable for difficult projects below 36 meters. Because of the high cost, it is rarely used.

4. Track window cleaner: Track window cleaner is special for some high-rise buildings. This construction method is the same as the hanging basket method, but it is easy to move.

5. Indoor double-sided wiping method: Some glass windows are cleaned by scraping with double-sided magnetic glass, which can be operated indoors, but it has low efficiency and poor reliability and is widely used in the south. Because of the magnetic force, it has little effect on the hollow double-layer glass.

Question 6: What is the cleaning quota for high-altitude external walls? In case of cleaning, the repair quota 15- 1 17 applies. I hope it works, but if it doesn't, don't scold me.

Question 7: How much is the external wall cleaning? The new wall is 1.00- 1.80.

Old wall m2 1.50-3.00

The square meter of aluminum-plastic panel wall is 1.80-2.50.

Curtain wall glass m2 1.50-2.50

The square meter of wall doors and windows is 1.50- 1.80.

Billboard stand 100.00-500.00

Bronze uranium word renovation m2 150.00

Question 8: What should I use to clean the external wall tiles? Since the establishment of Baoliangjie service, all the new customers we have received have asked this question like the landlord. We have answered many such questions. Let's take a look and share our company's experience with the landlord:

1, when the surface of ceramic tile is polluted by cement? A concrete thin-layer cleaning agent can be used, which is suitable for cleaning internal and external wall tiles (glazed tiles, integral tiles, vitrified tiles, polished tiles), decorative tiles, clay products, ash, lime slag and cement thin layers on natural stone materials.

2. When the surface of the ceramic tile of the inner and outer walls is polluted by the caulking agent? You can use a special cleaning agent for caulking agent.

3. When the ceramic tile surface of the inner and outer walls is polluted by rust spots? First of all, you need to judge whether the rust is on the surface of the tile or has penetrated into it. By analyzing the causes of rust, such as iron railings, iron frames and iron products, it can be judged that this rust is on the surface of ceramic tiles, and Kline rust remover is selected for cleaning. If the rust has penetrated into the interior of the tile, it can be cleaned with Kline strong rust remover. This kind of phenomenon mostly occurs on the decorative tiles or split brick. Strong rust remover can be used to remove rust spots on acid-resistant natural or artificial stones. In addition, the corroded substance in natural stone will automatically change its original natural appearance.

4. When paint is found on the tiles of the interior and exterior walls? What cleaning agent should be used for tiles? Baoliangjie service personnel use degreaser scavenger. The degreasing agent is suitable for cleaning the surfaces of tiles, stones, glass, plastics, metal products and other objects. It can effectively remove paint, water-based paint, asphalt, stickies, adhesive tape, adhesive tape residue, lipstick trace, soot, etc. on the surface of the above objects.

At the same time, the hotel's ceramics, enamel products, glass products, plastic products, aluminum products, tiles, floor tiles and so on are cleaned.

5. Use alkaline cleaner for ice cream.

6, lime scale using acidic cleaner.

Here are some reminders for novices:

1, rubber gloves are required when using the above detergents.

2. Remove stains and then scrub the brick surface with clear water.

3. The market or supermarket has the latest decontamination detergent. Please refer to the above decontamination scope and methods.

4. Good-quality tiles, such as Asian and Champion tiles, have less air bubbles and strong pollution resistance. When it happens, it can be wiped with a wet cloth in time. Don't use too many chemicals, which may be counterproductive and affect the luster, waterproof and life of tiles.

Of course, clean water is essential.

Question 9: Labor cost, medicine cost per square meter, gadgets cost, tax rate, management fee and auxiliary materials cost in the budget table for exterior wall cleaning. Hanging basket cost or no such cost can be used for rope hanging workers to carry out construction.

Question 10: What are the laws and regulations on external wall cleaning in China? & gt Chapter I General Provisions

Article 1 In order to strengthen the safety management of aerial suspension operation, protect the life safety and health of operators and ensure the construction safety of aerial suspension operation, these Provisions are formulated in accordance with the Regulations of Jiangsu Province on the Supervision and Administration of Work Safety and other relevant laws, regulations and standards on work safety.

Article 2 These Provisions shall apply to enterprises engaged in the cleaning and decoration of building exterior walls and billboards and enterprises leasing hanging equipment in this province.

Article 3 The term "high-altitude suspension operation" as mentioned in these Provisions refers to the operation carried out from the upper part of a building along the facade with ropes through suspension equipment on a device specially equipped with operators and tools used by them.

Chapter II Safety

Article 4 Enterprises engaged in aerial suspension operations must establish and improve the responsibility system for production safety, formulate the following rules and regulations and strictly implement them:

(a) the responsibility system for production safety;

(2) Safety regulations for high-altitude suspension;

(3) Construction technical scheme;

(4) Safety operation procedures for suspension equipment;

(5) Technical specification for installation and debugging of suspension equipment;

(six) suspension equipment safety inspection system;

(seven) suspension of equipment maintenance, maintenance and overhaul system;

(eight) the distribution and wearing system of labor protection articles;

(9) Safety training and assessment system for operators and equipment installation and maintenance personnel.

Hanging operation enterprises must do a good job in recording and archiving the implementation of the above system.

Article 5 The design and manufacture unit of aerial suspension equipment must design and manufacture in strict accordance with GB5083-85 General Rules for Safety and Hygiene Design of Production Equipment, JG5027-92 Safety Rules for Hanging Baskets for Aerial Work and other standards and technical specifications, and be responsible for the safety performance of the designed and manufactured equipment. The general design drawing shall be signed by the person in charge of the design and the reviewer, and stamped with the official seal of the unit.

Enterprises that manufacture high-altitude suspension equipment must obtain corresponding qualifications, and their products have been appraised by relevant provincial departments for quality and safety. Safety performance testing of equipment shall be carried out by safety technology testing institutions recognized by provincial safety production supervision and management departments.

Article 6 Suspension equipment, electrical appliances, mechanical safety accessories, safety devices, safety ropes, safety belts and other special labor protection articles must meet the relevant national safety standards or industry standards. Hanging equipment should be established one by one products and use, inspection, maintenance, maintenance files.

Article 7 Tools, equipment, cables, water pipes, etc. Reliable anti-falling measures must be taken for high-altitude suspension operation.

Operators hanging from high places must be able to use safety belts and safety ropes correctly and skillfully. The upper end of the safety rope should be fixed firmly and reliably. When in use, the safety rope should be basically vertical to the ground, and the remaining rope behind the operator should not exceed 1 m. Without special safety measures, it is forbidden for two people to use a safety rope at the same time. Article 8 The safety of the surrounding environment should be ensured in the site area of high-altitude suspension operation, and a warning line should be set below the operation, and people should be sent to guard it, and signs should be set in an eye-catching position.

Article 9. It is not allowed to carry out high-altitude hanging operation without a license in bad weather such as fog, rainstorm, heavy snow and strong wind (wind speed 10.8m/s, equivalent to gust level 6) or at night. Do not work in the same vertical direction at the same time. Keep away from the high-voltage line 10 meter, and do not operate without special safety protection measures.

Article 10 Patients with hypertension, heart disease and acrophobia. Anyone who is not suitable for aerial work shall not engage in aerial suspension work.

Personnel engaged in aerial suspension operations have the right to refuse aerial suspension operations if they are unwell or their safety cannot be guaranteed.

Eleventh construction enterprises must carry out safety inspection of hanging equipment. Safety inspection is divided into daily inspection and regular inspection. The daily inspection shall be conducted by the team before going to work, and the regular inspection shall be organized by the enterprise safety management department. Records of regular inspection shall be signed by the person in charge of enterprise safety management department and filed. Among them, the wire rope should be inspected once before each construction and lubricated at least once a month; Check the seat climbing board and safety rope before each construction.

Hanging basket devices newly installed, overhauled and left idle for more than one year must be inspected by qualified safety inspection institutions in accordance with the Safety Regulations for Hanging at High Places before starting.

Article 12 If suspension equipment cannot be used due to structural restrictions of buildings, relevant safety technical measures must be implemented. After the signature of the person in charge of the construction enterprise, the seat-type climbing board or suspension device that has passed the inspection by the safety technical inspection institution can be used for operation.

Article 13 A hanging equipment leasing enterprise shall ensure the safety of the equipment. & gt