Job Recruitment Website - Property management - Urgent! I have a senior friend who used to be a warehouse manager. Please come in for guidance.
Urgent! I have a senior friend who used to be a warehouse manager. Please come in for guidance.
I only knew a little about computers before, so I applied for the position of assistant. Like you, I lied that I had a year's experience. Others saw it at a glance, and I studied hard and did it. They didn't say anything. Later, the work was better. Believe in yourself.
I won't ask you what you did in the warehouse during the interview, just want to talk to you. After all, the company has company procedures. Just have confidence.
Friends who have done all related work such as inventory, warehouse management and procurement come in. This problem is really difficult to deal with. We have met before, but ours is just the opposite. We want what's inside, but another name is written on the package. The warehouse manager just won't accept it. Finally, I called the buyer and asked enough people that it was what he wanted. From now on, every time we arrive, we should invite enough people to check with the warehouse manager, provided that these people live in the company.
Which friend knows where to recruit warehouse managers in Shenzhen? Many enterprises recruit warehouse managers. You can attend some on-site job fairs, but it is best to go after the year, because most enterprises had a holiday before the year. Hehe, in fact, enterprises now like online recruitment, like many large domestic enterprises, such as Haier and Lenovo, all recruit online. Save resources! You can look at it online. I heard that Jiji.com is very good. Many of my friends have found jobs online. You can also try. Jiji.com, Baidu Shenzhen Stock Exchange, has a recruitment channel and a lot of enterprise information, which is formal. I believe you will find a job soon.
I urgently need to answer some questions of the warehouse administrator, 1: application form for dead material inspection and material scrap form.
2. Unless there are special requirements, unpacking inspection is generally not needed, because IQC also needs unpacking inspection.
3. Now everyone is using ERP or SAP system, just do bookkeeping in the system, and financial knowledge is not very important!
4. I found this for the first time. As soon as the interviewer listens, you are hopeless. It's best to talk to an experienced friend and look at this knowledge, such as warehouse process, 5S, warehouse responsibility, first in first out. Finally, I wish you adult success!
How much is the salary of the warehouse keeper in Wuhan? 1500 or so
What is the age of being a warehouse manager? Just graduate from junior high school.
Usually small companies.
Just add and subtract.
Seriously, you can't learn anything.
I just came out of school and worked as a warehouse manager for almost a year.
Not only did I not learn anything, but I also neglected my major.
Can you learn anything when you are a warehouse manager? It is to exercise a careful ability, make invoicing bills every day and make inventory every month.
In fact, getting started is very monotonous. Repeat the same work every day, and occasionally work overtime during the peak season.
Huawei's counter-current warehouse manager process warehouse managers have a lot of work and great responsibilities, and there must be detailed processes in the process of work to be orderly. The following is the detailed workflow of the warehouse administrator, please refer to it.
Management process:
Tabulation registration; Establish accounts by category; Different models; Stacked separately; Purchase requires signature and approval; There are credentials for outbound; Declare the shortage in time; Monthly inventory; Design several forms; Establish the corresponding system. When warehouse conditions permit, the warehouse can be divided into several areas (or parts), and an account can be set up in each area (pages should be continued with loose-leaf account books, but each account page should have a page number). Each accessory must have a separate account page.
Warehousing process:
The material purchasing personnel shall go through the formalities of material warehousing, and the warehouse keeper shall fill in the material warehousing form in triplicate, with one stub warehouse as the warehouse account (not required to be used separately), one for the buyer and one for the accounting account. The warehouse receipt must be signed by at least the buyer and the warehouse keeper.
Outbound process:
Similarly, the warehouse keeper should also fill in the purchase requisition, which should be signed by the requisitioner, the warehouse keeper and the relevant person in charge in triplicate and submitted to the accountant, the requisitioner and the warehouse for bookkeeping.
In this way, the basis of accounting and warehouse bookkeeping is the same, and problems can be found and solved through month-end reconciliation.
General description: The specific responsibilities of the warehouse administrator.
1. Receiving process
1. 1. Normal product receipt
1. 1. 1 According to the supplier's arrival notice, after the goods arrive, the receiving personnel will check the receipt according to the container list attached by the driver.
1. 1.2 The receiving personnel should pinch the lead seal with the driver and open the door to check the condition of the goods. If the goods are seriously damaged, they should immediately notify the supervisor and logistics manager to wait for treatment. If the goods are in good condition, they should start unloading.
1. 1.3 When unloading, the consignee must strictly supervise the loading and unloading of the goods (handle them carefully) to ensure that the quantity, packaging and shelf life of the products are in strict conformity with the packing list. Any damage and shortage must be strictly indicated on the receipt, and documents signed by the driver, such as accident records, transportation quality tracking forms, delivery notes, etc., should be kept. Damage and shortage must be reported to the supervisor and production manager in time so as to inform the customer in time.
1. 1.4 In case of bad weather (rain, strong wind, hail, etc. During the unloading process, all measures must be taken to ensure that the product will not be damaged. The unloading personnel should supervise that all products are stacked on the pallet, and the quantity of each stack should be stacked in strict accordance with the products.
1. 1.5 The consignee shall sign the list of delivery boxes, fill in relevant required documents, and submit relevant receiving information to the supervisor, such as product name, quantity, production date (shelf life or batch number) and cargo status.
1. 1.6 After receiving the order, the relevant information notice must be entered into the account on the same day.
1. 1.7 The damaged products must be stored separately from the normal products, waiting for treatment. And store it in relevant records.
1.2. Received returned or defective products.
1.2. 1 All kinds of returns and defective products must have corresponding documents. If the transportation company or the driver cannot provide the corresponding documents, the warehouse personnel have the right to refuse the goods.
1.2.2 There is a difference between a good product and a bad product. If it is a good product return, the goods must be kept in good condition, otherwise the warehouse refuses to receive the goods; The receipt of defective products must be consistent with the corresponding documents and well packaged.
1.2.3 The defective products must conform to the model and quantity on the notice, otherwise the warehouse will reject them.
1.2.4 After receiving the goods according to the documents, the goods in different states should be stored separately, and the return or replacement documents and the receipt documents should be submitted to record the product name, quantity and status.
1.2.5 recorded in general ledger according to documents.
2. Delivery process
2. 1. 1 All outbound goods must have documents authorized by the company (authorized signature and seal) as the delivery basis.
2. 1.2 After receiving the delivery notice from the company, the warehouse administrator will review the documents (check the correctness of the documents and whether there is enough inventory), and notify the Ministry of Transport to arrange vehicles after the review.
2. 1.3 The warehouse manager delivers the goods strictly according to the invoice. If there is any discrepancy between the invoice and the quantity of goods, the warehouse administrator must inform the supervisor in time and clearly indicate the problem on the invoice so as to solve it in time.
2. 1.4 The warehouse manager shall check the quantity of stock according to the delivery note, check the delivery vehicle according to the delivery note, and check the condition of the carrier vehicle before loading.
2. 1.5 The warehouse keeper will deliver each single item of goods out of the warehouse in turn according to the order of the dispatching list, and check the serial number, quantity and status of the delivered products with the driver. 2. 1.6 After loading, the driver shall indicate the car number and name on the warehouse receipt, which shall be signed by the warehouse keeper and the driver.
3. Inventory management
3. 1. Goods storage
3. 1.65438+
3. 1.2 All goods cannot be placed directly on the ground, and must be placed on wooden pallets according to the standard of goods location. Articles must be kept clean, and articles stored for a long time must be cleaned regularly. It is not allowed to put anything unrelated to the goods, such as waste paper, waste products and adhesive tape. 3. 1.3 The damaged and defective products are placed separately in the shelf area, and kept in a clean state with accurate records.
3.2. Inventory process
3.2. 1 All goods must be fully stocked once every six months. Class A goods must be provided once a month. Class B runs once every three months, and Class C runs once every six months. 3.2.2 Make an inventory of outbound products every day, and make a circular inventory of some other commodities to ensure the accurate quantity of commodities. 3.2.3 Blank inventory: For each inventory, the receiver prints an inventory list, excluding the product quantity, and gives it to the inventory personnel. At least two inventory personnel shall conduct inventory, fill in the inventory quantity in the blank, and after the inventory is finished, both of them shall jointly sign to confirm the quantity. Submit the inventory table to the reporter, and the reporter will enter the inventory quantity in the inventory table to match the quantity. If there is any quantity difference, it is necessary to reprint the difference sheet for the second inventory, and there is no difference after the second inventory. If there is any difference, it needs to be checked. If there is any mistake in the process of receiving and delivering goods, it needs to contact the customer in time to see if the loss can be recovered. If the loss cannot be recovered, it shall be handled according to the accident handling procedure.
4. Daily management of the warehouse
Inspection contents of warehouse daily operation audit table
1. Whether the reservoir area and the ground in the reservoir area are free of silt and sundries.
2. When working tools are not used, they should be parked in the designated area.
3. Doors, windows, skylights and other openings are kept closed and in good condition when not in use, which can effectively prevent birds and other flying insects from entering. 4, warehouse lighting device in good condition and safety. (Inspection method: Turn on all the lights in the warehouse, and check whether there are any unlit lights and whether the brightness is enough) 5. Is the warehouse clean and tidy? (Requirements: a. All documents should be placed neatly; B, there is a clear classification)
6. Whether the warehouse floor is clearly marked with stacking area and tally area.
7. Empty pallets should be neatly stacked in the designated area.
8. Goods shall be piled up without inversion and superelevation.
9, goods neatly stacked, no damage or deformation of goods. (Except goods stored in damaged or shelved areas)
10. The active positions in the warehouse are coherent and there are no unnecessary active positions. (Active location: the location indicated by the active identifier, which can be moved flexibly in the warehouse as required)
1 1. Are there any warning signs (including arrows on the safety line, no smoking, etc.)? ) effective, neat, and posted?
12. Is the "Stock Card" of each receipt correctly and clearly filled in and posted?
13. Are damaged, shelved and prohibited items stored separately and labeled accordingly?
14. Have the damaged or shelved goods been disposed of within 3 months?
15. Is there any leakage, damage, undeclared status and relocation of the consignment?
16. All returns must be processed within 2 days, and a "Return Notice" must be affixed to the returns.
17, the warehouse has no traces of "four pests".
18. Is the ledger inventory consistent with the actual inventory?
19. Is the warehouse prepared and delivered in full accordance with the "invoice"?
20, the same warehouse, the same variety of goods must be stacked in the same area or similar areas; Goods of the same variety should be stored in the same warehouse.
2 1. If the products of the same customer can be stored in one warehouse and one warehouse can be stored, then the products of that customer must be stored in the same warehouse.
22. When receiving the goods, whether the goods are carefully sorted according to regulations. (Inspection method: If any goods are received, please check and sort by batch number on site; If there is no receipt, please check whether there are goods with different dates, batch numbers and varieties at the same location in the warehouse)
Ask the warehouse manager's rules and regulations for a standard factory lease contract.
2009-05-04
Standard workshop lease contract stipulates that
Lessor (Party A):
Lessee (Party B):
According to the relevant regulations of the state, on the basis of voluntariness, equality and mutual benefit, Party A and Party B have reached an agreement and signed a contract on matters related to Party A's lease of its legally owned factory to Party B as follows:
First, the factory building is rented.
The workshop leased by Party A to Party B is located in, and the leased building area is square meters. The type of workshop is structured.
Second, the factory payment date and lease term
1. The renovation date of the factory building is next month, starting on, and ending on. Rent-free during renovation.
2. The lease period of the workshop starts from the date of the month to the date of the month. The lease term is years.
3. After the lease expires, Party A has the right to take back the leased plant, and Party B shall return it as scheduled. If Party B needs to continue the lease, it shall submit a written request to Party A three months before the lease expires, and sign a new lease contract after Party A agrees. ..
Three. Payment method of rent and deposit
1. Party A and Party B agree that the daily rent of the workshop is RMB per square meter of construction area. The monthly rent is RMB, and the annual rent is RMB.
2. The annual rent will remain unchanged for the first year and increase by 3%-5% from the second year.
3. After Party A and Party B sign the contract, Party B shall pay Party A the factory lease deposit, that is, one month's rent. The rent shall be paid in advance for three months, and the payment date shall be paid to Party A before the 5th of the payment month.
Four. other charges
1. During the lease period, Party B shall bear the communication expenses such as water, electricity, gas, telephone, etc. for using the factory building, and pay within three days after receiving the receipt or invoice.
2. During the lease term, Party B shall pay the property management fee of RMB yuan per square meter per day per month.
Five, the factory use requirements and maintenance responsibilities
1. During the lease period, if Party B finds that the factory building and its ancillary facilities are damaged or damaged, it shall promptly notify Party A for maintenance; Party A shall carry out maintenance within 3 days after receiving Party B's notice. If the maintenance is overdue, Party B can repair it on behalf of Party A, and the expenses shall be borne by Party A. ..
2. During the lease period, Party B shall reasonably use and care for the plant and its ancillary facilities. If the factory building and its ancillary facilities are damaged or broken down due to improper or unreasonable use by Party B, Party B shall be responsible for maintenance. If Party B refuses to repair, Party A can repair on behalf of Party B, and the expenses shall be borne by Party B. ..
3. During the lease period, Party A shall ensure that the plant and its ancillary facilities are in normal use and safe state. Party A shall notify Party B three days in advance to inspect and maintain the factory. During the inspection and maintenance, Party B shall cooperate. Party A shall reduce the impact on Party B's use of the plant.
4. If Party B needs to decorate or add ancillary facilities and devices, it shall obtain the written consent of Party A in advance. Where approval from relevant departments is required according to regulations, Party A shall report to relevant departments for approval before proceeding.
Sublease and return of factory buildings.
1. During the lease period, if Party B sublets the factory building, it shall obtain the written consent of Party A in advance. If the factory is subletted without authorization, Party A will not refund the rent and deposit.
2. After the lease expires, the factory should be returned to normal use.
7. Other relevant agreements during the lease period.
1. During the lease period, Party A and Party B shall abide by national laws and regulations, and shall not use the factory lease for illegal activities.
2. During the lease period, Party A has the right to urge and assist Party B to do a good job in fire control, safety and hygiene.
3. During the lease period, if this contract cannot be performed due to irresistible reasons and municipal relocation, both parties shall not be responsible for each other.
4. During the lease period, Party B may carry out renovation according to its own operating characteristics, but in principle, it shall not destroy the original house structure, and the renovation expenses shall be borne by Party B. If Party B fails to bear it after the lease expires, Party A shall not make any compensation.
5. During the lease period, Party A shall provide Party B with the telephone number free of charge. If you need more than one telephone, the expenses shall be borne by Party B. ..
6. During the lease period, Party B shall pay the rent and all other expenses payable in time. If the payment is overdue for one month, Party A has the right to increase the late payment fee by 5% and terminate the lease agreement.
7. After the lease expires, if Party A continues to lease the house, Party B has the preemptive right; If it is not leased after the expiration, Party B shall move as scheduled, otherwise all losses and consequences arising therefrom shall be borne by Party B. ..
Eight. other terms
1. During the lease period, if Party A terminates the contract in advance and breaches the contract, it shall compensate Party B for three months' rent. During the lease term, if Party B withdraws the lease in advance and breaches the contract, it shall compensate Party A for three months' rent.
2. During the lease period, if the normal operation of Party B is affected by the property right certificate, Party A shall bear all the compensation responsibilities.
3. Party A can handle the business license and other related procedures on its behalf, and the expenses shall be borne by Party B. ..
4. If the name of the enterprise changes after the signing of the lease contract, it can be sealed and signed by both parties for confirmation. The original lease contract remains unchanged and will continue to be implemented until the expiration of the contract.
5. When the power supply bureau collects electricity charges from Party A, it shall collect RMB per kilowatt hour according to the planned electricity consumption of Party A and the actual electricity consumption of Party A.. Therefore, Party A charges Party B the same fee for the planned electricity consumption and the actual electricity consumption.
Nine. Matters not covered in this contract shall be settled by both parties through consultation according to law.
X this contract is made in quadruplicate, with each party holding two copies. This contract shall come into effect after being sealed and signed.
Yulong is with the warehouse manager. Hello, landlord, the things left in the warehouse manager will not disappear. I hope the landlord will adopt it
Remember to adopt
- Previous article:Where is Jinmao Bay (store) in Nansha, Guangzhou?
- Next article:Introduction of Tianhe Square in Guangzhou
- Related articles
- Where is Yuanxiong Peak Garden in Chengdu?
- Hello, Luo Xiao, when will Huarong Modern City open? Can you tell me its orientation and apartment type?
- What is the greening rate of Chaoyang Fortune Field?
- What is the focus of hotel property management during the Spring Festival? What should the security guard pay attention to when on duty?
- China Railway Information Technology Group Co., Ltd. Provident Fund Deposit Ratio
- How about Sinochem Jinmao Property Management (Beijing) Co., Ltd.
- Do all employees of Chongqing Xindazheng Property buy social security in Shenzhen?
- Is Bozhou Nanhu Huafu Plaza worth buying?
- What is the telephone number of Weifang Shidi Jinyu Garden Marketing Center?
- What about Dalian Dayun Property Management Company?