Job Recruitment Website - Property management - What if the wall is wet? The solution on the wall is wet.

What if the wall is wet? The solution on the wall is wet.

What if the house is damp and moldy, and how to solve the moldy room? This is a difficult problem that plagues every family in rainy season or warm days. Is there any skill to solve the problem of damp and moldy room? In this article, Bian Xiao, Tuba Rabbit, gives you a hint to easily solve the damp room and moldy room. & lt& lt& lt Click here to apply for renovation insurance for free, so as to avoid the renovation trap >>& gt.

First, the analysis of the causes of room humidity

No matter spring, summer, autumn and winter, as long as the indoor temperature is higher than the wall temperature, the wall may show signs of moisture. In fact, this is mainly because the insulation of the wall is not done well. Because the wall does not well separate the indoor temperature from the outdoor temperature, the temperature difference is very large, resulting in moisture and humidity. Of course, it depends on the weather. No matter how good the wall is, it can't be completely the best. When the climate humidity is too high, it will also affect the room. This is only one aspect, and the key is the previous problem. If the room is damp, it is harmful to human body. What if the room is wet?

Second, the solution of wet room

1, using dehumidifier

When the room is wet, desiccant and activated carbon can be used to prevent moisture and absorb moisture. There are many desiccants specially used for moisture prevention and dehumidification in supermarkets, the most common ones are moisture absorption boxes and dehumidification bags.

2. Dehumidify with lime and bamboo charcoal

Put a proper amount of lime in a small cloth bag, tie it into a small bag and put it in every corner of the room. Lime itself has the function of moisture absorption and can also slow down the indoor humidity. At the same time, lime also has disinfection function, killing two birds with one stone. Bamboo charcoal dehumidification can be used repeatedly, but it needs to be used more. Without it, the effect is not so good.

3. Use the machine to dehumidify

Buy an air dehumidifier, which, like a vacuum cleaner, can collect moist air, when the moisture turns into water very often.

Air conditioning dehumidification. Household air conditioners generally have the function of dehumidification. However, it takes two or three hours for the air conditioner to adjust the indoor air humidity, and it will make people feel very cold indoors.

4. Clever use of doors and windows to solve the humidity problem.

When the external humidity is high, doors and windows should be closed to prevent moisture and damp. Usually, more windows should be opened for ventilation to reduce indoor water vapor content. Especially in newly renovated houses, the humidity is particularly strong, and more ventilation is needed to eliminate the humidity.

Bian Xiao, a large rabbit, warned:

When the indoor humidity is too high, if you don't use a computer or TV, it's best to make a protective cover to prevent the rear of the electrical appliance from touching the humid air. And these appliances should be turned on more, because the heat generated when the machine is running can also effectively disperse moisture.

Third, the solution to mildew in the room

Moldy wall

1, cause analysis of room mildew

When the indoor humidity is too high, it will lead to the phenomenon of mildew and long hair on the wet wall. When indoor mold spreads, it will have a very bad influence on people's health, especially those who are allergic to skin. It is also possible that during the decoration process, when putty is scraped, it is not completely dried the first time, and it is scraped the second time, and the moisture inside leads to mildew.

2, the wall moldy solution

(1) Dry toothbrush to brush off mold.

When there is mold on the wall, you can first brush off the mold stain with a dry toothbrush, and then gently wipe it with a soft cloth dipped in alcohol, which can dry the wall and prevent mold from breeding.

(2) Use bleaching powder to solve indoor mildew.

The problem of moldy wall can be solved by adding water to bleaching powder according to the ratio of 1: 99, mixing it into a spray bottle and spraying it on the moldy wall. If the weather is still wet, bleach and water can be mixed according to the ratio of 1: 20 and coated on the mold wall. After the wall is dry, smooth it with sandpaper, then brush a layer of waterproof primer and finally a layer of latex paint.

3, the repair method of moldy room

Demolition of moldy walls (the larger the demolition area, the better the repair effect); Brush the sealing paint (alkyd paint) thicker, and brush the latex paint from a new batch of ash. Because the moldy wall is caused by humidity, pay attention to ventilation when using it in the future.

The damp room may also be caused by unreasonable layout and poor decoration quality. We should avoid this controllable factor in time to ensure the quality of our decoration. Everyone can apply for the decoration insurance of Tuba Rabbit, which can realize one-on-one decoration consultant and decoration quality inspection, effectively preventing the decoration company from using false materials, cutting corners and adding items later. The above is about how to do about damp and moldy houses. I hope it will help everyone! & lt& lt& lt Click here to apply for renovation insurance for free, so as to avoid the renovation trap.