I want to make a light box in the elevator. How can I put the electricity in?

Let me introduce the charging method of acrylic:

Before installing the acrylic blister light box, we must first determine the specific location where the blister light box should be installed. We must remember that the specific installation plan must be formulated according to different kinds of light boxes.

After the installation position of acrylic blister light box is determined, accurate size measurement is needed. The specific operation method is to further determine the installation and fixation according to the actual size of the installation hole on the back of the blister light box.

Point. Of course, in the actual operation process, due to the different installation materials.

Therefore, the fixing of its fixed points is also different. For example, the installation of a light box that needs to be hung should be fixed according to the actual size of the installation hole of the light box after the specific installation position is determined.

Point installation, and then connect the digital expander and the ground wire, and you're done.

After that, the wiring will be done. Generally, people with a little experience know that the socket of the power cord of the acrylic blister light box is on the back of it, so the operation must be carried out in strict accordance with the relevant program steps to avoid

There was an accident. After the blister light box is fixed, several fixing points need to be installed. The last step is to electrify it, try to light it and clean its surface.