What is the process of floor heating installation drawing?

Floor heating is a comfortable and healthy general heating method, but if it is not installed properly, it will not be able to play its own advantages. Only by ensuring standardized installation can floor heating play its due role. Let's see how the floor heating installation drawing is installed. The first step of floor heating installation: the floor heating system should be designed according to the insulation, heat dissipation, room function, furniture placement, floor material selection and adjustable heat source of different rooms. The second step of floor heating installation: the laying of floor heating pipes is the most important thing in floor heating construction. The laying of floor heating pipes directly affects the heating effect of floor heating system. If improperly installed, the floor heating will be overheated or overheated locally, so when laying the floor heating pipeline, attention should be paid to the construction according to the installation diagram of the floor heating. The third step of floor heating installation: there is a certain distance between the floor heating and the wall, that is, expansion joints, to prevent the floor heating from cracking due to thermal expansion and contraction during use, which will affect the heating effect. The fourth step of floor heating installation: horizontally install the distribution manifold at the designated position in the floor heating installation schematic diagram, with the water separator below the upper water collector with a distance of 200mm, and the height of the center of the water collector from the ground is not less than 300 mm.. The fifth step of floor heating installation: leveling is the last step of floor heating installation and an important part of construction. The horizontal line of the whole house must be at a height. Generally, the floor heating project is leveled with pisolite concrete and cement mortar, so that there will be no uneven heating when the heating is turned on.

?