Can the strong and weak current box be shifted? What's wrong with the shift of the strong and weak electricity box?

When installing the strong and weak current box indoors, some people find that its position is not suitable for their daily use, which is a bit of a hindrance, so they plan to move the position of the strong and weak current box to other places, but can the strong and weak current box be moved? If there is a need to move the strong and weak current box, it is also necessary to know what problems exist in the shift of the strong and weak current box.

1. Can the strong and weak current box be shifted?

Both the strong box and the weak box can move. Safes are generally not opened at home and can be placed in hidden places. You can move according to the logo on the apartment structure map. If there is no load-bearing wall 30 cm above and below the entrance door, you can move the strong box to this place. Not only will it not affect the overall interior decoration effect, but it is also very hidden.

The weak box can be completely moved to the corridor wall of the living room facing the bedroom or study. At the place 10 cm from the ground, you can completely change a slightly larger electric box and decorate a pot of plants next to it, which will not be affected at all. For example, because my door is facing a corridor, I moved the weak box to the opposite wall. I put a pot of plants at the door, and I can't see them at all. The scenery will be particularly good.

Although the strong and weak current box can be completely moved, we should strictly pay attention to the norms of digging walls, pulling wires and wiring during the moving process, otherwise it will be very troublesome if the network and TV are changed or something goes wrong in the future. Strong and weak electricity boxes should be separated. If the strong and weak current are very close, eddy current will be generated between the wires, which will greatly affect the stability of the weak current signal.

Second, what's the problem with the shift of the strong and weak electricity box?

1, strong electric box

For the strong box, the key is to see if the entrance line is long enough! Incoming line refers to the line from the main distribution box to each house, which belongs to public facilities.

Before 2000, many old houses (brick-and-concrete structures) did not have indoor strong electrical boxes or had the problem of aging household lines. Because the main line of this old house is exposed, it will be more convenient to change it. Therefore, when decorating such a house, you can replace the household lines and install a strong box indoors. The location of the strong box can be selected in a wider range. However, after 2000, new houses (concrete pouring) basically have distribution boxes indoors, and the incoming lines are all hidden lines poured in the floor. Changing the entrance route is very complicated, and you must obtain the permission of the property! With the consent of the property, the strong box can be moved to the desired location after the bus is replaced by a longer new home line.

If the property does not agree to change the entrance line, and the length of the entrance line does not meet the change requirements, do not move the strong box position. Because all lines can't have connectors, it can't be taken for granted that wiring is enough.

2. Weak box

It is much easier to change the position of weak boxes than strong boxes, which are limited by the length of household lines and property. Weak current wires will be longer, making it easier to pull or change wires. So the position of most weak boxes can be changed. It should be noted that the height of the strong and weak current box from the ground should be between 1.6m 1.8m, which is too low to be safe for children and too high to be convenient. The height of the weak box from the ground is 0.3m0.4m, and they should not be close to each other, preferably more than 0.3m, so as to avoid weak current interference.

Can the strong and weak current box be shifted? If you need to move the strong and weak electricity box, you can also move it, as long as it can meet the safety needs. What's wrong with the shift of the strong and weak electricity box? If you want to move the strong and weak current box, you must find a professional electrician to complete it, so as to ensure the smooth movement of the strong and weak current box.