What important details should office decoration pay attention to?

I believe many people are familiar with the complicated procedures in office decoration, from the initial wall decoration, water and electricity construction, muddy water, carpentry, painting, lighting engineering, cleaning to completion acceptance, each of which is enough to make the owners feel headache. About office decoration construction, we can talk about six details.

First, in the process of wall painting

Latex paint has become the most common wall decoration material in the decoration market at present, and the construction is relatively simple, so it can be brushed, roller coated or sprayed. Workers' careless or perfunctory construction often leads to slight color difference, especially dark latex paint.

The remedy suggested by Yingke Decoration is to take a certain amount of clean water before using latex paint, and pay attention to the distribution of latex paint that should be used up at one time. Paint of the same color should also be painted at one time.

Second, the sewer pipe matters needing attention

When the local construction team stopped the renovation, in order to save trouble, cement, sand and concrete fragments were poured into the sewer. This is easy to form kitchens and bathrooms because of poor running water. Although there is no problem in the final acceptance of some projects, there is always a problem of poor launch.

The remedial measures suggested by Yingke Decoration are to strictly monitor the construction team and not to use the sewer as a garbage passage. After the waterway construction is completed, all basins, basins and bathtubs should be filled with water to see whether the waterproofing is normal, whether the water is unblocked and whether the pipes are leaking.

Three, wire connector matters needing attention

When installing sockets, switches and lamps, electricians do not connect wires according to the construction requirements. Especially when consumers use high-power appliances such as water heaters and air conditioners, switches and sockets are heated or even burned, which brings great trouble and economic losses to the owners.

The remedial measures suggested by Yingke Decoration are that the monitoring electrician should stop the construction in strict accordance with the operation procedures, and after all the switches and sockets are completed, the practical application must be stopped to see if these parts can generate heat.

Four, the wall and floor tile paving matters needing attention

Paving wall and floor tiles is a highly technical process, which is prone to tile hollowing and joint inequality. In addition, the cement and adhesive used for paving tiles are also exquisite. If the ratio is unreasonable, it will also present problems such as fragmentation.

The remedy suggested by Yingke Decoration is to ask the tile shop for a tile laying plan before laying bricks, and ask the master to construct according to the plan after repeated verification. Now many masters are willing to construct according to the drawings, provided that the construction drawings are reasonable.

V. Precautions for Wall Trough

Buried pipelines must be slotted in the wall and air before they can be buried. A few workers stop slotting and carry out barbaric construction, which not only damages the load-bearing structure of the building, but also may damage other pipelines nearby.

The remedial measure suggested by Yingke Decoration is to confirm the direction and location of the pipeline with the construction team leader before construction. According to different wall structures, the requirements for slotting are also different. For example, the load-bearing wall at home is not allowed to be slotted, and the wall with insulation layer is easy to crack outside after being slotted. However, if you slot in the air, you should be more careful not to destroy the floor and bring trouble to the residents downstairs.

VI. Matters needing attention in joint decoration

At the joints between some walls and doors and windows, and in the middle of the joints between two different colors of paint, it is also a place where workers often perfunctory. You will often see that the coating between latex paint and wood is mixed with each other, and various problems appear at the joints.

The remedy suggested by Yingke Decoration Sauce is that if there are two colors of paint on the wall, the adhesive tape must be attached to the edge of the first color during construction, and then the paint of another color is applied, so that the whole joint can be very neat by tearing off the adhesive tape after construction.