What is the process of installing elevators in old buildings?

With the improvement of people's living standards, it is a common phenomenon to install elevators in old buildings. Then the problem is coming. Do you know the process of installing elevators in old buildings? What are the requirements for installing elevators? What is the function of the elevator in the old building that is necessary? Come and have a look with me.

Technology of installing elevators in old buildings

First of all, the design unit will survey the site and hold a residents' meeting to discuss the preliminary design scheme; Secondly, the district ladder office does the preliminary examination, and the agent gives the relevant information to the community for preliminary examination; Finally, publicity before approval, cost decomposition and layout objection, selection of general lead unit, signing of ladder extension agreement, application for planning permit and obtaining certificate.

What are the conditions for installing an elevator?

According to the guidance, the installation of elevators in old buildings should meet the following five conditions:

1. Within the scope of cities and towns, build houses according to law and deliver them for use;

2. Non-single property right;

3. Not included in the scope and plan of house expropriation;

4. The building is 4 stories high and above;

5. The building structure meets the safety standards.

Those functions of elevators in old buildings must be matched.

First: there must be handrails in the car, and at least one handrail is needed to facilitate the travel of special people.

Secondly, there should be an auxiliary operation box to facilitate the special people in wheelchairs.

Third: What is the opening size of the elevator? 80 cm, convenient for special people in wheelchairs to travel.

Fourthly, in order not to affect the lighting of low-level users, it is recommended to use the full sightseeing elevator.

Fifthly, it is necessary to install video surveillance in the elevator car for the sake of community safety and elevator protection.

Sixth: Power failure emergency devices are also essential.

Seventh: For the conditional community, it is suggested to design the elevator as a stretcher ladder. After all, no one can guarantee that nothing will happen.

Eighth: it is suggested that the rear wall of the car should be made of mirror stainless steel.

Editor's summary: After reading the above introduction, I believe everyone has a further understanding of the process of installing elevators in old buildings. Please continue to pay attention to our website for more information, and more exciting content will be presented to you later.