What should the property manager do if there is a fire in the community! urgent

One: Received an alarm.

Two: judge the position and send someone to call the police immediately.

2. 1: The disaster is light: notify the security personnel to handle it by themselves.

2.2. Misreport: Find out the reason and put it on record.

2.3: Serious disaster: report the fire to 1 19, notify the fire chief, and the director of management office will be present.

2.3. 1 organize personnel evacuation for safety protection.

2.3.2 Organize security personnel to rush to the scene to put out the fire.

2.3.3 Cut off the air supply and power supply, and switch the emergency power supply.

2.3.4 Check the working conditions of fire-fighting equipment that has been automatically started, and forcibly start other fire-fighting facilities when necessary.

2.3.5 Monitor the fire and guard the post of the fire control center.

2.3.6 Clean up the fire scene, make disaster records, investigate those responsible for the fire, and report to relevant departments.

Initial fire alarm handling procedure

1, when the initial fire is discovered, the personnel present should:

(1) immediately report to the building fire monitoring center, including the specific location of the fire, the nature of combustible materials, the direction of fire spread, etc.

(2) immediately put out the fire by using nearby fire fighting equipment, and try to control the development of the fire;

(3) If possible, close doors and windows to slow down the fire.

2. After receiving the on-site report, the security guard on duty in the fire monitoring center:

(1) Report to the supervisor on duty immediately;

(2) Contact the head of the security department and report the situation;

(3) Closely monitor the alarm position.

3. After receiving the fire report, the duty supervisor:

(1) lead firefighters and bring fire extinguishers to the fire site as quickly as possible;

(2) immediately command the personnel present to put out the fire;

(3) Command the personnel at the fire site and possibly affected areas to use the safe passage to evacuate.

4. After the fire broke out, the duty supervisor arranged personnel to stay at the scene of the fire and wait for the company to investigate.

5, if the fighting is invalid, the duty supervisor immediately decided:

(1) Evacuate firefighters to a safe distance;

(2) report to the superior immediately;

(3) Enter the fire emergency treatment procedure.

Fire alarm signal processing program

1. When the security guard on duty in the fire monitoring center receives a fire alarm signal or calls the police:

(1) Inform the security guards or administrators patrolling the building by walkie-talkie to go to the site for verification immediately;

(2) Immediately report to the supervisor on duty and make clear the alarm position;

(3) Set a monitoring camera on the alarm floor to monitor and report the situation to the supervisor on duty in time.

2. After receiving the call from the security guard on duty in the fire monitoring center, the building patrol security guard or administrator will rush to the alarm site as quickly as possible for verification and follow the following rules:

(1) The alarm place is in a public place, so go directly to the alarm place for inspection.

(2) The alarm location is in the office. First ring the doorbell, simply explain the reason to the user, and then enter the alarm site for inspection.

(3) The alarm location is in the shopping mall, and enter the alarm location for inspection together with the management personnel of the shopping mall.

(4) The alarm location is in the parking lot, and the parking lot management personnel shall enter the alarm location for inspection.

(5) The alarm location is in an independent store in the shopping mall and is locked. Immediately report to the supervisor on duty and the supervisor on duty in the shopping mall, and stay at the scene for observation. After the arrival of the supervisor on duty and the supervisor on duty in the shopping mall, decide whether to unlock and enter the inspection.

(6) The alarm position is in the office building unit and locked, and immediately report to the supervisor on duty, and stay for observation, waiting for the supervisor on duty to decide whether to unlock and enter the inspection.

3. When the duty supervisor receives the security report from the fire monitoring center, he will immediately lead the mobile personnel to the alarm site for on-site inspection.

(1) After on-site inspection at the alarm site, it was confirmed that it was a false alarm, and the security guard on duty in the fire monitoring center was immediately notified to reset it. If you enter office units, shops or parking lots for inspection, you need to explain clearly to the users and apologize before you leave.

(2) When the alarm place is locked in an office building unit or an independent shop in a shopping mall, if an open flame or smoke is observed, it must be unlocked for on-site inspection, and locked after the danger is eliminated to inform the user.

(3) After the on-site inspection shows that there is a fire, it shall be handled according to the initial fire treatment procedure.

4, the fire monitoring center reset the duty security signal after receiving the instruction from the duty supervisor, and make records.