What internal problems should be paid attention to in plant decoration?

1, the first detail to be paid attention to in plant decoration is to evaluate the ground, because plant decoration must keep the ground flat. If it is uneven, it will have a certain impact on future plants. If there is unevenness, it can be paved with 1:3 cement mortar in time or directly with cement gravity.

2. The large trunking has a certain relationship with the ground, so we must pay attention to the width and depth of trunking. If the size is insufficient, the ground will be uneven after laying the conduit, resulting in reverse operation.

3. If there are some new spaces in the indoor partition, according to the fire protection regulations, independent smoke detectors must be added, and professional factory decoration companies must be invited to do fire protection. Usually the maintenance unit of the building. If you don't change this detail and the second detail, you can't pass the property acceptance.

4. In the transformation of the factory building, the network wiring and all wires that need to be threaded must use steel pipes instead of PUC pipes commonly used at home, and the wire boxes must also use iron (sometimes PUC can also be used).

5, the attention details of the ground are finished, that is, above the ground. In the decoration of modern factories, there are certain specifications for fire prevention. If the factory wants to have a ceiling, all the sprinklers on the site should leak a certain size from the ceiling and keep it level.

6. At present, due to the relatively small scale in the transformation process of many factories, the weakness transformation (including network cables and telephone lines) is often not done by specialized wiring companies. It is important to pay special attention to that the data and voice labels must be put away during the pay-off period, so as not to bring trouble to the follow-up work.

7. Now many factories are equipped with central air conditioning and fresh air system, but the indoor air outlet may not just meet the requirements. At this time, the professional decoration company needs to send professionals to extend or transform the vents, and the ceiling engineering department needs to cooperate.

8. No matter whether asbestos board or mineral wool board is selected for the ceiling of the factory building, it must be hung with a roller rod to be stable and durable for a long time. If it is hung by wire, it is absolutely not allowed. After the office equipment comes into play, the high and low voltage wiring should be installed in various positions together with the office partition installation to prevent it from being pulled and placed indiscriminately.