How to deal with water leakage in heating pipes

1. What should I do if the radiator leaks?

First, close the radiator inlet valve and return valve, then block the leaking position with a towel, and then use the water container to receive water to ensure that the furniture such as the floor at home is not damaged. Remember to call the property manager later.

Second, the common emergency measures for radiator leakage:

1. When the radiator at home leaks, the user should first carefully find the leaking part.

2. Because the heating system is divided into water supply and backwater, there are at least two control valves. Therefore, after finding the leakage part, it is convenient to find the control valve of the leakage part.

3. Turn the determined control valve clockwise until it can't be turned.

4. After closing the valve, observe whether the water leakage has improved. If not, it means that the valve has failed or the wrong valve has been selected.

5. After completing the above procedures, the user should immediately call the heating maintenance center or contact the radiator manufacturer to deal with the water leakage problem as soon as possible.

Three, how to deal with radiator leakage:

First of all, close the valve, and then check the specific location of radiator leakage.

1. If the loose connector leaks, replace the loose connector.

2. If the connector leaks, replace the calibration line;

3. If the interface leaks, replace the heating pipe and its accessories;

4. If the radiator leaks due to sand holes, it needs to be replaced, because the radiator may burst, otherwise it will suffer heavy losses due to small losses.

Four, common radiator leakage parts:?

1, radiator title

Because of the process, the radiator head and the cylinder are welded together, not as a whole, and the solder joint is easy to be corroded. On this issue, the solution of radiator manufacturers is to continuously improve the welding process and strengthen the internal anti-corrosion treatment. When choosing radiators, try to choose radiators with high-quality anti-corrosion coating inside. Pay more attention to the title position in daily use, call the manufacturer in time, and deal with the damage in time.

2. Radiator contact

All kinds of connection points of heating system are very easy to leak water, including the connection points between pipes, the connection points between pipes and radiators, air leakage, blockage and so on. These connection points are always in contact with water and air, and poor quality materials will slowly corrode, causing water leakage. When selecting materials, we should pay attention to the quality of pipes and radiator fittings. In case of water leakage, you should replace the accessories in time.

3. Radiator tube wall

In general, the leakage of radiator wall is caused by accidental damage, and the damage here needs to be repaired in time to avoid further corrosion.

Verb (abbreviation of verb) summary of experience:

If the radiator leaks due to installation problems, you can call the installation team to deal with it after closing the valve. If you are within the warranty period, you can also seek compensation; If the radiator leaks, you need to contact the seller to consult and replace the radiator, usually within the warranty period.

If your residential area belongs to the old-fashioned heating system, you need to contact the property to close the main gate in time, and then find a heating unit to deal with it in time, otherwise it will not only cause losses due to water leakage, but also affect the heating of other users in the residential area. Therefore, everyone must recognize the brand when buying radiators, and don't blindly buy unqualified products because they are cheap. Rubens, a big radiator brand, promises that the steel radiator will be guaranteed for 15 years, and the copper-aluminum composite radiator will be guaranteed for 30 years, and the leakage will only be replaced without repair!