Job Recruitment Website - Property management - How to seal the balcony of the duplex building if it is too high?

How to seal the balcony of the duplex building if it is too high?

As an extension of the building, the balcony of the duplex building can be used as a reading area and a leisure and entertainment area. In order to avoid wind and rain invading the room, many families will choose to close the balcony, but how to close the balcony of the duplex building because it is too high? What problems should be paid attention to in balcony sealing? Let's take a look at the relevant knowledge right away.

1. How to seal the balcony of the duplex building if it is too high?

Because the balcony of the duplex building itself is high, it is recommended to install it as a casement window balcony for safety reasons. When making the frame, try to choose aluminum alloy or plastic steel window material, and choose insulating glass in the middle to prevent the glass performance from being damaged. Or choose to abandon the guardrail and make a fixed window with a frame inside, and then install it in the guardrail and add a sliding window made of aluminum alloy.

Second, the matters needing attention of balcony sealing of duplex building

1, modification requires approval.

Before the balcony is closed, the consent of the residential property is needed. In order to maintain the beauty of the whole building, some communities do not allow owners to package the balcony of the duplex building privately. If it is packaged without consent, the property has the right to dismantle the packaging part after discovery, and the owner has to pay the corresponding fine, which is not worth the candle.

2. Make sure that the windows are installed firmly.

If the property allows the balcony to be closed, attention should be paid to its safety and firmness in the process, especially the joints such as windows, walls and lintels, which should be fixed in concrete with nails and rivets and reinforced with angle steel.

3, do a good job of acceptance

After the balcony is closed, it is necessary to do a good job of acceptance. First of all, look at whether the window package is well pressed and whether the position installation is correct and firm. Window frames and interfaces should be filled with cement mortar, and the slope of water flow should be made at the outer position, so that rainwater can flow to the outside better.

Conclusion: The relevant knowledge about how to seal the balcony of duplex building is introduced here, hoping to help everyone. If you need to know more, please continue to pay attention to Qijia. Com, more exciting content will be presented to you later.