What should the property manager do if there is a fire in the community?

Fire emergency treatment process \x0d\ x0d \ 1: Upon receiving the alarm \ x0d \ 2: Determine the location and send someone to call the police immediately. \x0d\2. 1: The disaster is light: notify the security personnel to handle it by themselves. \x0d\2.2: Misreport: Find out the reason and put it on record. \x0d\2.3: The disaster is serious: 1 19 report the fire, notify the fire chief, and the director of the management office will be present. \x0d\2.3. 1 Organize personnel to evacuate for safety protection \x0d\2.3.2 Organize security personnel to rush to the scene to put out the fire \x0d\2.3.3 Cut off the gas and commercial power supply, switch the emergency power supply \x0d\2.3.4 Check the working condition of the fire-fighting equipment that has been automatically started, and forcibly start it if necessary. 2.3.6 Clean up the fire scene, make disaster records, investigate the person responsible for the fire, and report to the relevant departments \ x0d \ x0d \ preliminary fire treatment procedures \ x0d \1. If an initial fire is found, the personnel present should \x0d\( 1) immediately report to the building. \x0d\(2) Immediately use nearby fire-fighting equipment to put out the fire and try to control the development of the fire; \x0d\(3) If possible, close doors and windows to slow down the fire. \x0d\2。 After receiving the on-site report, the security guard on duty in the fire monitoring center: \x0d\( 1) immediately reports to the supervisor on duty; \x0d\(2) Contact the head of the security department and report the situation; \x0d\(3) Closely monitor the alarm position. \x0d\3。 After receiving the fire report, the supervisor on duty: \x0d\( 1) leads the firemen and carries the fire extinguisher to the fire site as quickly as possible; \x0d\(2) Command the personnel present to put out the fire immediately; \x0d\(3) Command the personnel at the fire site and possibly affected areas to evacuate by using the safe passage. \x0d\4。 After the fire is put out, the supervisor on duty will arrange personnel to stay at the scene of the fire and wait for the company to investigate. \x0d\5。 If the fire fighting fails, the supervisor on duty immediately decides: \x0d\( 1) Evacuate the firefighters to a safe distance; \x0d\(2) Report to the superior immediately; \x0d\(3) Enter the fire emergency handling procedure. \x0d\\x0d\ fire alarm signal processing program \x0d\\x0d\ 1. When the security guard on duty in the fire monitoring center receives the fire alarm signal or telephone alarm: \x0d\( 1) Inform the building patrol security guard or administrator to go to the site immediately for verification; \x0d\(2) Immediately report to the supervisor on duty and specify the alarm position; \x0d\(3) Set a monitoring camera on the alarm floor to monitor and report the situation to the supervisor on duty in time. \ x0d \ 2。 After receiving the call from the security guard on duty in the fire monitoring center, the building patrol security guard or administrator will rush to the alarm site as quickly as possible for verification, and follow the following rules: \x0d\( 1) The alarm site is in a public place, so go directly to the alarm site for inspection. \x0d\(2) The alarm location is in the office building unit. First ring the doorbell, simply explain the reason to the user, and then enter the alarm site for inspection. \x0d\(3) The alarm location is in the shopping mall, so go to the alarm location for inspection together with the management of the shopping mall. \x0d\(4) The alarm location is in the parking lot. Please go to the alarm location together with the parking lot management personnel for inspection. \x0d\(5) If the alarm location is in an independent store in the mall and it is locked, immediately report to the supervisor on duty and the person in charge of the mall on duty, and stay at the scene for observation. After the supervisor on duty and the person in charge of the mall on duty are present, then decide whether to unlock and enter the inspection. \x0d\(6) If the alarm location is in the office building unit and it is locked, report it to the supervisor on duty immediately, and stay for observation, waiting for the supervisor on duty to decide whether to unlock it for inspection. \x0d\3。 After receiving the security report from the fire monitoring center, the duty supervisor will immediately lead the mobile personnel to the alarm site as soon as possible for on-site inspection. \x0d\( 1) After on-site inspection, the alarm site was confirmed to be a false alarm, and the security guard on duty in the fire monitoring center was immediately notified to reset it. If you enter office units, shops or parking lots for inspection, you should explain clearly to the users and apologize before you leave. \x0d\(2) When the alarm place is locked in an office or a shopping mall, if an open flame or smoke is observed, it must be broken to enter the site for inspection, locked after the danger is eliminated, and the user shall be informed. \x0d\(3) After the on-site inspection shows a fire, it shall be handled according to the initial fire treatment procedure. \x0d\4。 After receiving the instruction from the supervisor on duty, the security guard on duty in the fire monitoring center will reset the signal and make records.