Manufacture of professional membrane structure garage

1. Before making the membrane structure carport, it should be prepared and cut according to the construction drawings. Pay attention to the reserved welding shrinkage when cutting, and make a good sample.

2. The measurement and setting-out of the membrane structure garage is generally based on the civil elevation baseline, and the elevation center line of the built-in parts is predicted, which should be sorted out, the deviation checked and the adjustment scheme determined.

3. Installation and treatment of embedded parts in membrane structure carport, locate the position where embedded parts are to be installed, and punch holes. Remember that this position must be accurate, embedded firmly, and the deviation cannot be too large.

Precautions:

The carport consists of columns and ceilings. Columns are mostly made of metal alloys, such as steel and aluminum, which are light in weight and hard in texture. The carport is more and more widely used in the market, and it is a part of the green travel of urban public transport facilities.

In order to return the city to a healthy and fresh environment, citizens should strengthen their awareness and reduce the emission of carbon, especially carbon dioxide, so as to reduce the pollution to the atmosphere.

In order to slow down the ecological deterioration, the membrane structure garage is a newly developed architectural structure. Since the 1960s, membrane structures have been gradually applied to long-span buildings such as sports buildings, shopping malls, exhibition centers and transportation service facilities abroad.