Is the house inspection carried out by the property or by itself?

When inspecting the house, you can let the property or developer accompany you to inspect the house. Home inspector will point out the problems one by one on the spot, so as to decorate the house in the future. You can also inspect the house yourself. According to the test report issued by the owner and the relevant suggestions provided by home inspector, combined with the size of the housing problem, the owner communicates with the property or developer to ask the other party to rectify as soon as possible.

What is the inspection of the house?

1. Wall material: red brick, light brick, cinder brick, hollow brick or precast slab.

2. Wall surface: Pay attention to whether there is plastering layer on the wall surface, whether there is hollowing, cracking, peeling and mottling on the plastering layer, and the angle of yin and yang is roughly square.

3. Floor: whether there is plastering layer, calendering and sanding with feet, whether heating pipes, water pipes and electric pipes are marked underground, and whether the promised floor heating is realized. Whether the floors of kitchen, balcony and bathroom are lower than other floors.

4. Top surface: mainly pay attention to whether there is a big skew with the square on the ground, and pay attention to whether there is water leakage on the top surface of the kitchen, balcony and bathroom.

5. Doors and windows: whether the switch is flexible, whether it is tightly closed, whether it is warped, deformed and not tightly closed.

6. Water supply: mainly check whether the kitchen and bathroom, the water rooms of the main pipeline and branch pipes are set up.

7. Sewer: mainly check whether the kitchen and bathroom, the main sewer pipe and the water chamber of the sewer pipe are set up, and whether the drainage outlets of bathtubs, squatting pans, wash basins and other places are reserved.

8. Waterproofing of the floor: the floors of the kitchen, bathroom and balcony in the room should be waterproof, and the property is required to do a closed water test when inspecting the room.

9. High voltage: Check the configuration of sockets, switches and lamps in each room in detail. The power cord should be hidden under the wall.

10, weak current: weak current lines such as TV, telephone, network and stereo. Everything promised by the director should be checked and accepted item by item, such as broadband.

1 1. gas: whether the main pipeline and branch pipelines are equipped with gas chambers, and whether the gas meters and control valves are complete. Note that it is absolutely not allowed to dismantle and modify natural gas pipelines without authorization.

12. heating: check whether the heating pipes and radiators are installed tightly and firmly, whether the pipe joints are leaking, and check the pressure test records.

How to inspect the house when it is fully installed?

The owner should first check whether the developer has all the legal documents delivered, that is, the completion acceptance record form, the residential quality guarantee, and the residential instruction manual, and if necessary, check the corresponding originals.

1, structural acceptance

Property buyers should inspect the renovated house as a whole, check the area, check the location, measure the public area, and check whether the outdoor facilities are in good condition. Check the drawings carefully to see if there are any changes in the location of important facilities, and record any changes. Once it is found that the fully installed housing structure does not meet the contract, it should be proposed to the developer before moving in.

2, air acceptance

Although fully equipped rooms can be moved in directly, considering the impact on family health, it is necessary to check whether the indoor air quality is suitable for moving in immediately at the time of acceptance. In addition, property buyers should confirm whether the materials used by developers in construction and decoration meet the national standards when inspecting houses.

3, ceiling/ceiling acceptance

Ceiling installation requires that the top corner line should closely cooperate with the surrounding walls, and the connection degree between gusset plates should be consistent, and there should be no big cracks and warpage. The ceiling should look flat and smooth.