Wall leakage treatment

Treatment of wall leakage: repair and replace water pipes, contact property maintenance, redo waterproofing, etc.

1, directly replace or repair water pipes.

If it is because of the water pipe, you can replace the water pipe, or repair the water pipe with special tape first. First, close the valve, then cut off the water source, open the faucet to a suitable position, and release the pressure in the water pipe. Then, you can tie the leaking part tightly with special adhesive tape or plug it with a plugging device.

2. Contact property maintenance.

Any problems related to the external wall should be reflected to the residential property, and the property should contact the engineering department for wall maintenance.

3, redo waterproof

Owners with leaking walls at home can buy waterproof materials to stop leakage and brush them on the walls and floors of bathrooms. The best way is to invite professional decoration workers to handle it.

Causes of wall leakage

1, cold outside the wall and hot inside.

Due to the high temperature of the inner wall, condensed water is formed on the wall, which leads to the wall wetting. This kind of situation usually appears in winter, and it will be better in summer, but there will be some mildew on the wall, which will affect the beauty of the wall.

2. The water pipe on the wall leaks

Usually, the water pipe embedded in the wall leaks and the wall is wet, which mostly occurs in the bathroom, ceiling and wall. This situation is usually caused by water leakage from the embedded water pipe joint.

3. Waterproofing is not done well

If the waterproof measures are not done well, water will slowly penetrate into the wall. For example, when painting a wall, if the waterproof coating is not completely dried during the first painting, the second painting will make the water vapor inside the wall unable to be distributed, thus making the wall wet.