Property buyers must look at seven skills when buying a house and collecting keys.

According to the relevant regulations, developers should issue or publicize "two books and one form" (residential quality guarantee, residential instruction manual and comprehensive filing form for commercial housing acceptance) when delivering new houses. Seeing the "two books and one form", it is a normal procedure for the owner to accept the house, finally pay the relevant fees and sign the "Notice of Occupancy" to handle the property handover procedures.

Tip 2: Check waterproof.

Looking at the wall is the primary problem of house acceptance, especially the bathroom and kitchen. You can plug waterproof plastic in the crack of the door, tie all kinds of nozzles with plastic film, and then drain the water on the ground with tap water pipe, the thickness of water should not exceed 2cm. Make an appointment with the owner downstairs and observe whether the ceiling downstairs leaks after 2 hours. Be sure to dry the accumulated water after the test to avoid freezing.

Tip 3: Look at the wall.

Water seepage on the wall is generally difficult to find, so it is best to look at the house the next day after it rains, so as to find out whether there is such a problem on the wall.

Tip 4: Look at the horizon.

Checking the horizon is to measure the horizontal error between the indoor ground farthest from the door and the door on the mainland.

Method: You need a small transparent water pipe, about 20 meters long, and then fill it with water.

Draw a mark at the entrance of 0.5m or 1m above the ground. Then adjust the water level of the water pipe to the height of this mark and find yourself fixed in this position;

Then move the other end of the water pipe to the room farthest from the door, see the height of the water pipe there, and then make a mark;

Measure the height of this mark from the ground with a ruler. The difference between these two heights is the elevation difference of the house.

Generally speaking, a difference of about 2 cm is normal, and 3 cm is tolerable.

Tip 5: Watch the doors and windows.

The key point of inspection is to check the tightness of windows and balcony doors. The best time to test the tightness of the two is windy and rainy weather, but it is impossible to just encounter such "good" weather when closing the house. Therefore, the problem can be detected by checking whether the sealing tape is intact and firm. The balcony door usually depends on the level difference between the inside and outside of the balcony door.

Tip 6: Look at the pipeline.

If the drainage or sewage pipes are not smooth, daily life will definitely be particularly affected after moving in. The method is to take a water container in advance, and then pour the water into the drain to see if the water flow is smooth.

Tip 7: Look at the wall.

When inspecting the house, we should look at the painting of the wall. Some projects are poorly constructed, and depressions can appear after a few taps. Be careful at this time, there may be more problems.

Shell inspection tool:

1 plastic washbasin-used to receive sewage pipes.

1 small hammer-used to check whether the walls and floors of the house are empty.

1 feeler gauge-used to measure the width of cracks.

1 5m tape measure-used to measure the clear height of the house.

1 multimeter-used to test whether the strong current socket and weak current socket are unblocked.

1 calculator-used to calculate data.

1 pen-used for signature

(The above answers were published on 20 17-0 1-22. Please refer to the actual purchase policy. )

For more real estate information, policy interpretation and expert interpretation, click to view.