How to maintain the solid wood floor? Oil or wax?

The maintenance of solid wood flooring needs to be waxed and oiled frequently. Solid wood flooring has higher requirements for pavement. Once the paving is not good, it will cause a series of problems, such as noise. If the indoor environment is too wet or too dry, the solid wood floor is prone to arching, warping or deformation. Wax and oil frequently after paving, otherwise the luster of the floor surface will soon disappear.

In order to maintain the beauty of solid wood floor and prolong the service life of paint surface. Wipe the floor clean before waxing, then evenly coat the surface with a layer of floor wax, and wipe it with a soft cloth after it is slightly dry until it is smooth and bright.

If a large area is accidentally flooded or partially soaked in water for a long time, if there is water, it should be sucked dry with a dry cloth in time and let it dry naturally. It is forbidden to dry or expose to the sun with an electric heater.

Exposure to strong sunlight for a long time, or the sharp rise and fall of indoor temperature may cause premature aging of solid wood floor paint, which should be avoided as far as possible. If you don't live in the installed place for the time being, you should keep the indoor air circulating, and you can't cover it with plastic paper or newspaper, so as not to lose the luster of the surface paint film for a long time.

Matters needing attention in using solid wood floor to expand information

1, it is forbidden to wipe the solid wood floor with wet towel or towel. Wipe with a wringing mop, not with a wet mop stained with detergent, so that water will penetrate into the inner layer of the floor through cracks on the floor surface, damaged paint surface and corners, resulting in warping, mildew and decay of the floor, and the wax layer cannot be completely attached after waxing.

2, it is forbidden to use organic solvents with acid and alkali to wipe the solid wood floor. Prevent corrosion and wear of surface paint.

3. It is forbidden to expose yourself to the sun. Pay attention to the room facing the sun, and draw a sunshade when going out to prevent direct sunlight at noon. At the same time, it also avoids the sharp rise of indoor temperature and prevents the aging of the board in advance.

4. Avoid cutting solid wood floor with sharp metal and glass. Especially when moving, the sharp corners of the furniture should be wrapped, and the furniture should be lifted and not dragged on the wooden floor.

Baidu encyclopedia-solid wood floor