The top floor of my house is warm, and the edge and floor are not hot. Please try to solve it.

1. The floor heating pipeline has not been cleaned yet. It is recommended to clean the floor heating pipeline in time. It is best to carry out professional cleaning on the later floor heating pipeline every two years, and the cleaning time can be before, during and after heating.

2. There is air in the geothermal pipeline. In this case, we need to check whether the backwater valve is open ("I" is open and "X" is closed); If the air in the geothermal pipeline causes air resistance, open the air valve to exhaust until hot water is released, or use the small valve on the water separator to adjust the circulation of each loop to make it circulate evenly, so as to achieve the ideal heating effect.

3. The circulation of the system is poor, the water pressure difference between the supply and return of the heating company is small, and the water flow rate drops, resulting in geothermal heat. This situation can be solved by looking for a property.

Neighbors compete for too much water. Maybe your neighbor or upstairs and downstairs installed a circulating pump on the pipeline, which led to too much water in his house, and people nearby would naturally be implicated. If the residents can't solve it themselves, they can negotiate with their neighbors and property.

5. The water temperature is low. In order to achieve the ideal indoor temperature 18~22 degrees Celsius, the floor heating water supply temperature must reach above 45 degrees Celsius. You can measure the temperature of the water inlet pipe yourself, or you can find a professional. If it is not up to standard, you can contact the property in your respective community.