How to compile emergency plan for safety production

(1) The group company is responsible for guiding all member units and the project department to simulate the accident state according to dangerous targets, and formulate emergency treatment plans under various accident states, such as formwork collapse, large-scale equipment collapse, foundation pit collapse, electric shock, personnel poisoning, gas leakage, combustion, explosion, water cut-off, power failure, etc. , including communication, emergency rescue, medical rescue, casualty transfer, personnel evacuation, production system command and reporting contact.

(2) The group company is responsible for guiding the company (branch) and the project department to formulate the accident handling procedure chart. In case of an accident, it will operate quickly, effectively and orderly according to the emergency plan to ensure that it is in a crisis and the command is correct. After the accident, under the unified command of the leading group, according to the evaluation of the potential danger of dangerous targets, the accident shall be handled and controlled in an orderly manner according to the disposal plan, so as not to be flustered and careless, and strive to control the accident to a minimum and minimize casualties and property losses.

(3) When an accident may pose a danger to the safety of people inside and outside the area, under the command of the leading group, people unrelated to the accident shall be evacuated for emergency rescue. When the safety of residents (including the staff of neighboring units) may be threatened, the leading group shall immediately contact the relevant local departments to guide residents to evacuate to a safe place quickly.

After the accident, emergency measures should be taken to avoid further expansion of the accident and increase of casualties, as well as secondary accidents in the emergency rescue process.

(d) Effective emergency repair is the key to control and eliminate accidents. Rescuers should, according to the pre-established plan and on the basis of personal prevention, eliminate risks, rescue in time with the fastest speed and eliminate accidents.

(5) In case of accidents, such as foundation pit collapse, formwork support, object strike, etc. , the project department should do its best to rescue the wounded at all costs, and report to its member units in time, which report to the group company, and start the emergency plan according to the accident level after receiving the report. Ask social forces for assistance when necessary. Leading group personnel shall designate special personnel to contact, guide and inform safety precautions.

People who fall from a height and have a fracture cannot move at will, but should be lifted with a stretcher template; Ventilation should be carried out as soon as possible to let patients with gas poisoning and suffocation breathe fresh air; According to the degree of poisoning and injury, patients with chemical poisoning should be injected with special antidote or given necessary drug treatment before being transferred to hospitals.

When people get an electric shock, they must cut off the power supply first, and then touch the injured, so as to avoid continuous electric shock casualties. If the injured person bleeds, stop the bleeding as soon as possible.

When a major mechanical equipment accident occurs at the scene, the person in charge of the project department should first judge whether the situation is likely to develop further, and immediately notify the relevant departments to organize forces to protect and rescue, control the development of the situation, and minimize the losses caused by the accident.

(6) Strengthen the training of rescue teams. The leading group should proceed from reality, organize a simulation drill at least once a year for key areas, parts or processes and equipment, and train each rescue team into a command team and rescue team with good thinking, fine technology and hard work style. In the event of an accident, each rescue team can promptly and effectively eliminate the danger, control and eliminate the accident, rescue the wounded and do a good job in emergency rescue according to their respective tasks.

(seven) after the scene of the accident, we should also pay special attention to stabilize the mood of the staff, and carry out accident prevention education for all staff.

(eight) seriously implement the "Regulations on the Reporting and Handling of Casualty Accidents of Enterprise Employees" in the State Council, do a good job in the investigation and handling of casualty accidents, and strictly implement the principle of "four passes".

Extended data:

The significance of safe production:

Safety in production is the consistent guiding ideology and important policy of the Party and the country's production and construction, and it is an inevitable requirement for comprehensively implementing Scientific Outlook on Development and building a harmonious socialist society. The fundamental purpose of safe production is to ensure the safety and health of workers in the production process. Safety in production is the unity of safety and production. Safety promotes production and production must be safe.

Without safety, normal production cannot be carried out. Doing a good job in safe production, improving working conditions and reducing casualties and property losses can not only improve the efficiency of enterprises and promote their healthy development, but also promote social harmony and ensure the safety of economic construction.

References:

Legal Information Network of China Municipal Government: Measures for the Administration of Emergency Plans for Production Safety Accidents