How to accept the house?

When the newly bought house is closed, we must do a good job of acceptance. If you can't accept it yourself, you can ask a professional master to help you accept it. But how do you close the house when you close it? What should I pay attention to when I close the house? When the house is accepted, we must pay attention to the walls, roofs, floors, doors and windows, circuits, waterways, pipes and so on.

A, metope acceptance

When closing the house, the acceptance of the wall is very important. When accepting the wall, we must pay attention to whether the wall is cracked or empty. We can use some tools to check whether the wall is empty, then mark it and fill it with putty. Check whether the putty on the wall is waterproof. You can bring a bottle of mineral water, splash water on the wall and touch it with your hands to see if there is mud on your hands. If not, it proves that the waterproof putty on the wall is qualified.

Second, the roof acceptance

When accepting the roof, be sure to check whether the roof is cracked. If there is a crack, we must find the property in time. Check whether the yin and yang corner lines of the roof and wall are horizontal. If not, in the later decoration, first use plastering gypsum to find a low level and then use water-resistant putty for leveling.

Third, the ground acceptance

Check whether the ground is flat, whether there are cracks and sand prevention: whether there are sand grains when rubbing the ground with your feet. This problem will occur if the mortar ratio or cement quality is unqualified and the mixing is uneven.

Four, door and window acceptance

Check the strength of doors and windows; Check the function of the window, the doors and windows are pushed and pulled smoothly, the surface is smooth, there is no serious scratch, and the profile is not cracked or damaged; Hardware accessories: complete, correct and firm; Sealing quality: when the doors and windows are closed, there is no obvious gap between the fan and the frame, and the sealing strip is not loose, falling off and exposed; Door and window frames and fans are vertical and not bent; The glass is pollution-free and damage-free, the double-layer glass interlayer is dust-free and moisture-free, and the partition is flat; Whether the window drain hole has been opened. Dead water will flow into the profile.

Five, waterway acceptance

Check whether the socket and switch settings are reasonable and whether the circuit needs to be modified during decoration. First, look at personal needs. Second, it depends on whether the socket and switch settings at home are reasonable and convenient to use. Whether the light switches and power sockets can be used normally. Waterways are mainly embodied in kitchens and bathrooms. Toilets generally have two floor drains, a toilet drain, a bathtub drain and a washbasin drain. See if the setting is reasonable, and then decide whether it can be changed according to the needs of your own decoration, but the specific transformation plan depends on the opinions of experts.

The above is about how to close the house when closing the house. I hope it will help everyone!